The PDT range of products includes a variety of compact fiber pigtailed devices designed for wide operating temperature, low cost applications such as fiber in the loop. The planar InGaAs photodiodes are manufactured using MOVPE growth technology and give low leakage and high responsivity performance with excellent reliability.
• Variety of Flange/Pinout Options
• Fiber Pigtail Options
• Compact Package
• High Reliability Planar InGaAs PIN Photodiode
• High Responsivity
• O-E Converters
• Single and Multimode Fiber Communications Systems
Features ● 3 Watts in DIP-24 Package ● Include 3.3VDC Output ● 4.5-6V, 9-18V, 18-36 and 36-75V Input ● No Derating to 71°C ●Typical Efficiency up to 80% ● Regulated Outputs ● Wide Input Voltage Range ● Over Current Protection, Continuous ● Pi Input Filter ● Low Profile, 10.2 mm Height ● MTBF 1.09 x 106 Hours ● 2 Year Warranty ● Standard and SMT-Pinning ● Non-Conductive Black Plastic ● International Safety Standard Approvals ● UL 1950 Component Recognised
Termination of coaxial cables in automotive, medical and instrumentation applications utilizes one step to crimp the center conductor, shield and outer insulation.
Features ● Cost efficient termination Highly efficient and reliable one step crimp termination allows high volume production with semiautomatic equipment. ● Space-saving Design Compact and light weight comparing with HRS GT5 series.
Bourns® Model 7004 NID provides a secure and weather-resistant enclosure for Telco service for residential or commercial installations. The Model 7004 supplies station protection and test access points and can be configured for a maximum of four POTS lines or three lines with DSL. The Model 7004 features convenient cable knockouts and generous working space for wire management.
■ Expands to add POTS lines, DSL or both
■ Manufactured from high-impact resistant, ultraviolet desensitized, flame retardant, UL Recognized plastic
■ Optional sealed switching jacks with Insulation Displacement Connectors (IDCs)
General Description IP101A LF is an IEEE 802.3/802.3u compliant single-port Fast Ethernet Transceiver for both 100Mbps and 10Mbps operations. It supports Auto MDI/MDIX function to simplify the network installation and reduce the system maintenance cost. To improve the system performance, IP101A LF provides a hardware interrupt pin to indicate the link, speed and duplex status change. IP101A LF also provides Media Independent Interface (MII) / Serial Network Interface (SNI) or Reduced Media Independent Interface (RMII) to connect with different types of 10/100Mbps Media Access Controller (MAC). IP101A LF is designed to use category 5 unshielded twisted-pair cable connecting to other LAN devices. IP101A LF Transceiver is fabricated with advanced CMOS technology, which the chip only requires 3.3V as power supply and consumes very low power in the Auto Power Saving mode. IP101A LF can be implemented as Network Interface Adapter with RJ-45 for twisted-pair connection. It can also be easily implemented into HUB, Switch, Router, Access Point.
Features ● 10/100Mbps TX ● Full-duplex or half-duplex ● Supports Auto MDI/MDIX function ● Fully compliant with IEEE 802.3/802.3u ● Supports IEEE 802.3u auto-negotiation ● Supports MII / RMII / SNI interface ● IEEE 802.3 full duplex control specification ● Supports Automatic Power Saving mode ● Supports BaseLine Wander (BLW) compensation ● Supports Interrupt function ● Supports repeater mode ● Single 3.3V power supply with built-in 2.5V regulator ● DSP-based PHY Transceiver technology ● Using either 25MHz crystal/oscillator or 50MHz oscillator REF_CLK as clock source ● Flexible LED display for speed, duplex, link, activity and collision ● Supports flow control to communicate with other MAC through MDC and MDIO ● 0.25u, CMOS technology ● 48-pin LQFP ● Support Lead Free package (Please refer to the Order Information)