Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Description : Military COTS DC/DC Converters

Military COTS DC/DC Converters

The MilQor series of MIL COTS DC/DC converters brings SynQor’s field proven high-efficiency synchronous rectification technology to the Military/Aerospace industry. SynQor’s ruggedized encased packaging approach ensures survivability in demanding environments. Compatible with the industry standard format, these converters operate at a fixed frequency, and follow conservative component derating guidelines. They are designed and manufactured to comply with a wide range of Military standards

Operational Features
•  High efficiency, 90% at full rated load current
•  Operating Input voltage range: 16-40 V
•  Fixed frequency switching provides predictable EMI
•  No minimum load requirement

Mechanical Features
•  Industry standard quarter-brick pin-out configuration
•  Size: 1.54" x 2.39" x 0.50" (39.0 x 60.6 x 12.7mm)
•  Total weight: 3 oz (85 g)

Control Features
•  On/Off control referenced to Input side
•  Remote sense for the output voltage
•  Output voltage trim range of -20%, +10%

Safety Features
•  2250 V, 30 MW Input-to-output isolation
• Certified 60950-1 requirements for basic insulation (see Standards and Qualifications page)
• CE Marked
• RoHS compliant

Protection Features
•  Input under-voltage lockout
•  Output current limit and short circuit protection
•  Active back bias limit
•  Output over-voltage protection
•  Thermal shutdown

Description : Military COTS EMI Filter

The Mil-COTS series of EMI flters brings SynQor’s feld proven technology and manufacturing expertise to the industrial power applications marketplace. SynQor’s innovative packaging approach ensures survivability in the most hostile environments. Compatible with the industry standard format, these flters have high differential-mode and commonmode attenuation, low DC resistance, and a stabilizing bulk capacitor resistor. They follow conservative component derating guidelines and they are designed and manufactured to the highest standards.

Operational Features
•  30A output current
• Very low DC resistance
• > 80 dB differential-mode resistance at 250kHz
• > 36 dB common-mode resistance at 250kHz
• Stabalizing bulk capacitor and damping resistor included
• All capacitors are X7R multi-layer ceramic

Description : 269-Type 14xx nm DFB Pump Laser Module

Description

The 269-type DFB pump laser Module represents a family of thermoelectrically cooled, high-power lasers. These devices achieve stable wavelength performance within the 1420 nm to 1510 nm range, over the full operating temperature range. They are designed as continuous-wave (CW) optical pump sources for dense wavelength-division multiplexing (DWDM) EDFA and Raman applications operating in the C- and L-bands.



Features

■ Low relative intensity noise (RIN)

■ High-coupled rated output power up to 280 mW,CW

■ Wide environmental range

■ Field-proven packaging technology

■ InGaAsP/InP high-power, strained multiple quantum-well (MQW), distributed-feedback (DFB) laser chip design

■ Internal optical isolator (optional)

■ Internal thermoelectric cooler (TEC)

■ InGaAs PIN photodetector back-facet monitor

■ Single-mode and polarization-maintaining fiber pig tails

■ Compact, 14-pin butterfly package

■ Industry compatible package and pinout



Applications

■ Raman pump Modules (RPM), copropagating and counterpropagating

■ Erbium-doped fiber amplifiers (EDFA)


Description : Metal Film Fixed Resistors
FEATURES
• Temperature Range: -55°C ~ +155°C
• ±1% tolerance
• Epoxy coated miniature resistors
• Nickel chromium ceramic substrate
• Alloy coated leads
• Welded end caps
• EIA standard color coding
Description : CMOS TCXO

Description

The PJ-B2980 Series of quartz crystal oscillators provide DPECL Fast Edge compatible signals. Systems designers may now specify space-saVing, cost-effective packaged PECL oscillators to meet their timing requirements.



Features

• Wide frequency range–60.0MHz to 312.5MHz

• User specified tolerance available

• Space-saVing alternative to discrete component oscillators

• High shock resistance, to 1000g

• 2.5 volt operation

• Metal lid electrically connected to ground to reduce EMI

• High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions

• Low Jitter - Wavecrest jitter characterization available

• Overtone technology

• High Q Crystal actively tuned oscillator circuit

• Power supply decoupling internal

• No internal PLL avoids cascading PLL problems

• High frequencies due to proprietary design

• Gold plated pads

• RoHS Compliant, Lead Free Construction



 


Description : ECM Surface Mount Power Inductors

The CDR / CDRH series of ferrite shielded inductors exhibit excellent current handling characteristics.



▪ Ferrite Shielded

▪ Up to 8 Amps

▪ Competitive Prices

▪ Low Profile to 2.0mm

▪ Typical Reel Size 1000pcs



 


Description : 269-Type 1480 nm Pump Laser Module

Description
The 269-type pump laser Module represents a family of thermoelectrically cooled, high-power lasers. They are designed as continuous-wave (CW) optical pump sources for dense wavelength-division multiplexing (DWDM) EDFA applications.

Features
■ High-coupled rated output power up to 280 mW, CW
■ Wide environmental range
■ Field-proven packaging technology
■ InGaAsP/InP high-power, strained multiple quantum-well (MQW) chip design
■ Internal optical isolator (optional)
■ Internal thermoelectric cooler (TEC)
■ InGaAs PIN photodetector back-facet monitor
■ Single-mode and polarization-maintaining fiber pigtails
■ Compact, 14-pin butterfly package
■ Industry compatible package and pinout

Applications
■ Erbium-doped fiber amplifiers (EDFA)

Description : 50-100 WATTS Military COTS DC/DC CONVERTER

[POWERBOX]

50-100 WATTS Military COTS DC/DC CONVERTER

Features
• 28Vdc Inputs per MIL-STD-704D/E/F
• 155Vdc Inputs per MIL-STD-1399A
270Vdc Inputs per MIL-STD-704D/E/F
• MIL-STD-810 environments
• OVP and Thermal shutdown
• Power boosters for higher power
• Low noise FM control

Description : 50-100 WATTS Military COTS DC/DC CONVERTER

50-100 WATTS Military COTS DC/DC CONVERTER



Features

• 28Vdc Inputs per MIL-STD-704D/E/F

• 155Vdc Inputs per MIL-STD-1399A

270Vdc Inputs per MIL-STD-704D/E/F

• MIL-STD-810 environments

• OVP and Thermal shutdown

• Power boosters for higher power

• Low noise FM control


Description : IEC Appliance Inlet C8, Screw-on Mounting, Front Side, Solder or Quick-connect or Print Terminal

Description

- Panel Mount:

  Screw-on mounting, from front side

- Appliance Inlet, Pin temperature 70 °C, Protection class II



 


12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]