KP SERIES

• A DIVERSE RANGE OF OPTOCOUPLERS, OFFERING 5,000V RMS ISOLATION
• MINIMUM 60% CURRENT TRANSFER RATIO, 600% FOR DARLINGTON OUTPUT
• PARTS SELECTED ACCORDING TO CURRENT TRANSFER RATIO
• FROM 4 TO 16 PIN SMD PACKAGE WITH 2.54mm PITCH
• KP1000: 1 TO 4 CHANNELS, DC INPUT, OPEN COLLECTOR OUTPUT
• KP2000: 1 CHANNEL, DC INPUT, BASE CONNECTION TO OPEN COLLECTOR OUTPUT
• KP3000: 1 TO 4 CHANNELS, AC INPUT, OPEN COLLECTOR OUTPUT
• KP4000: 1 TO 4 CHANNELS, DC INPUT, OPEN COLLECTOR DARLINGTON OUTPUT
• KP5000: 1 CHANNEL, DC INPUT, BASE CONNECTION TO OPEN COLLECTOR DARLINGTON OUTPUT
• KP6000: 1 CHANNEL, AC INPUT, BASE CONNECTION TO OPEN COLLECTOR OUTPUT
• KP7000: 1 CHANNEL, DC INPUT, AMPLIFIED OUTPUT WITH HYSTERESIS, BUILT IN PULL-UP RESISTOR GIVING TTL AND LS TTL COMPATIBLE OUTPUT
• FUNCTIONALLY EQUIVALENT TO INDUSTRY STANDARD PARTS FROM MOTOROLA, TOSHIBA, GE, SIEMENS, TELEFUNKEN, TEXAS INSTRUMENTS AND NEC

[Purdy Electronics Corporation]

OPTO-232C Series RS-232C Modems 4 Channels

The OPTO-232C series fiber optic modems use optical fibers to transfer up to four channels of RS232 data for point-to-point applications.

Applications
• Computer networking
• Remote peripherals
• High noise environment
• Factory/office automation

[Purdy Electronics Corporation]

OPTO-RS422 Series RS-422 Modems Data Lines Only

The OPTO-RS422 series fiber optic modems use optical fiber to transfer RS422 data for point-to-point applications.

Applications
• Computer networking
• Remote peripherals
• High noise environment
• Factory/office automation

Features:
• Display Mode: TN, Positive
• Display Format: 16 Character x 2 Line
• Input data: 4-Bits or 8-Bits interface Available
• Display Font: 5 x 7 Dots
• Power Supply: Single Power Supply (3V ± 10%)
• Driving Scheme: 1/16 Duty, 1/5 Bias

█Descriptions

The ITR9608consist of an infrared emitting diode and an NPN silicon phototransistor, encased side-by-side on converging optical axis in a black Thermoplastic Housing The phototransistor receives radiation from the IRED only .This is the normal Situation. But when an object is in between, phototransistor could not receives the radiation.

For additional component information , please refer to IR928-6C and PT928-6C

█ Features

․Fast response time

․High analytic

․Cut-off visible wavelength λp=940nm

․High sensitivity

․Pb free

․The product itself will remain within RoHS compliant version.

█Applications

․Mouse Copier

․Switch Scanner

․Floppy disk driver

․Non-contact Switching

․For Direct Board

ABSOLUTE MAXIMUM RATINGS

LED
• Forward DC Current 100 mA
• Surge Current 2.5 A
• Reverse Voltage 20 V
• Power Dissipation (25°C) 1000 mW

Photodiode
• Reverse Voltage 25,000 V
• Power Dissipation 2.5 W
• Storage Temperature -40°C to +125°C
• Operating Temperature -40°C to +100°C
• Isolation Test Voltage 25 kV (Pins 1 & 2 to Pins 3 and 4)

Description
The S25B880N3 is a low profile 25 dB directional coupler in an easy to use surface mount package covering AMPS applications. The S25B880N3 is ideal for power and frequency detection as well as VSWR monitoring and can be used in most high power designs. Parts have been run through rigorous qualifications and units are 100% tested. They are manufactured using materials with X and Y thermal expansion coefficients compatible with common substrates.

Features
• 869 - 894 MHz
• 350 Watts
• Low Loss
• High Directivity
• Surface Mountable
• Tape and Reel
• Convenient Package
• 100% Tested

FEATURES:
• Large Current Transfer Ratio
• Isolation Voltage Between Input and Output
    • HPC522/532/542 Viso =2500Vrms (Min.)
    • HPC722/732/742 Viso =4000Vrms (Min.)
    • HPC922/932/942 Viso =5000Vrms (Min.)
• Plastic DIP Package
• UL File # E178703

USES:
• Transmission and conversionof Digital Logic
• Power control and switch
• Electric insulation and impedence conversion between systems

Opto–Switch

Actuator



Phototransistor output.

Incorporates built–in actuator.

Small size allows use in confined spaces.

Nomechanical contacts ensurelong life expectancy.

Low operating force (15gf (0.15N)).

█ Descriptions

• The ITR9606-F consist of an infrared emitting diode and an NPN silicon phototransistor, encased side-by-side on converging optical axis in a black thermoplastic housing,

• The phototransistor receives radiation from the IRED only .This is the normal situation.

• But when an object is in between , phototransistor could not receives the radiation.

• For additional component information , please refer to IR928-6C-F and PT928-6C-F

█ Features

• Fast response time

• High analytic

• Cut-off visible wavelength λp=940nm

• High sensitivity

• Pb free

• This product itself will remain within RoHS compliant version

█ Applications

• Mouse Copier

• Switch Scanner

• Floppy disk driver

• Non-contact Switching

• For Direct Board