Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning.
Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement contents.)
Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants. .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Toggle option in antistatic material available for dissipating electrostatic discharges. Matching indicators available and shown at the end of Section M.
Description The CAT24C01/02/04/08/16 are 1−Kb, 2−Kb, 4−Kb, 8−Kb and 16−Kb respectively CMOS Serial EEPROM devices organized internally as 8/16/32/64 and 128 pages respectively of 16 bytes each. All devices support both the Standard (100 kHz) as well as Fast (400 kHz) I2C protocol. Data is written by providing a starting address, then loading 1 to 16 contiguous bytes into a Page Write Buffer, and then writing all data to non−volatile memory in one internal write cycle. Data is read by providing a starting address and then shifting out data serially while automatically incrementing the internal address count. External address pins make it possible to address up to eight CAT24C01 or CAT24C02, four CAT24C04, two CAT24C08 and one CAT24C16 device on the same bus.
Features • Supports Standard and Fast I2C Protocol • 1.7 V to 5.5 V Supply Voltage Range • 16−Byte Page Write Buffer • Hardware Write Protection for Entire Memory • Schmitt Triggers and Noise Suppression Filters on I2C Bus Inputs (SCL and SDA) • Low power CMOS Technology • 1,000,000 Program/Erase Cycles • 100 Year Data Retention • Industrial and Extended Temperature Range • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant
The H7467 is a PHOTON counting head designed for PHOTON counting by simply connecting to a PC (personal computer). The H7467 houses a metal package photomultiplier tube, high-voltage power supply circuit, PHOTON counting circuit, 20-bit counter and microprocessor in a compact package. Data transfer, measurement time and other necessary adjustments are controlled by commands from the PC through the RS-232C interface. The PHOTON counting circuit discrimination level and the high voltage supply for photomultiplier tube are preadjusted to optimum levels prior to shipment so that the H7467 can be easily operated by simply supplying +5 V.
Features Internal PHOTON counting circuit, counter, microprocessor and RS-232C interface allow control and data transfer by PC.
DESCRIPTION The IS605, IS606 are optically COUPLED ISOLATORs consisting of INFRARED light EMITTING DIODE and a light activated silicon controlled rectifier in a standard 6pin dual in line plastic package.
FEATURES • Options :- 10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. • High Isolation Voltage (5.3kVRMS ,7.5kVPK ) • High Surge Anode Current (5.0 A) • High Blocking Voltage (400V*1, 625V*1) • Low Turn on Current (5mA typical) • All electrical parameters 100% tested • Custom electrical selections available
Compact Head-on PMT PHOTON Counting Head H7828 Series
The H7828 series is a PHOTON counting head device containing a 19-mm (3/4") diameter head-on photomultiplier tube, a high-speed PHOTON counting circuit, and a high-voltage power supply circuit. The high voltage supply for photomultiplier tube and the discrimination level are preset to optimum values, allowing PHOTON counting measurement by just connecting a +5 V supply. Despite its compact size, the effective photosensitive area is as large as 15 mm in diameter, so the incident light can be collected very efficiently. Compared to other PMT modules, the H7828 series has higher resistance to vibration and shock, making them suitable for portable or mobile measurement equipment.