Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Description : Quadruple Bistable Latches

The HD74LS75 is ideally suited for use as temporary storage for binary information between rocessing units and input / output or indicator units. Information present at a data (D) input is transferred to the Q output when the enable (G) is high and the Q output will follow the data input as long as the enable remains high. When the enable goes low, the information (that was present at the data input at the time the transition occurred) is retained at the Q output until the enable is permitted to go high. This device features complementary Q and Qoutputs from a 4-bit latch.


Renesas Electronics
Renesas Electronics
Description : Quadruple Bistable Latches

The HD74LS375 bistable latch is electrically and functionally identical to the HD74LS75, respectively. Only thearrangement of the terminals has been changed in the HD74LS375. This latch is ideally suited for use as tem porary storage for binary information between processing units and input / output or indicator units. Information present at a data (D) input is transferred to the Q output when the enable (G) is high and the Q output will follow the data input as long as the enable remains high. When the enable goes low, the information (that was present at the data input at the time the transition occurred) is retained at the Q output until the enable goes high.


Part Name(s) : HD74LS375
Hitachi -> Renesas Electronics
Hitachi -> Renesas Electronics
Description : Quadruple Bistable Latches
Part Name(s) : 74LS279 HD74LS279
Hitachi -> Renesas Electronics
Hitachi -> Renesas Electronics
Description : Quadruple S-R Latches

Quadruple S-R Latches

Description : Differential Sine Wave

Description
The SR-A2A70 Series of quartz crystal oscillators provide Differential Sine Wave signals. This device is to operate using positive voltage and uses multiple ground pins for improved signal integrity.

Features
• Wide frequency range – 250.0MHz to 1.7GHz
• User specified tolerance available
• Will withstand SMD reflow temperatures of 183°C for 4 minutes maximum
• High shock resistance, to 1000g
• High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions
• Cover connected to ground
• 3.3V and 2.5V versions available

Renesas Electronics
Renesas Electronics
Description : Quadruple S-R Latches

Quadruple S-R Latches

Description : Quadruple S-R Latches

DESCRIPTION

The UT54ACS279 and the UT54ACTS279 contain four basic S-R flip-flop Latches. Under conventional operation, the S-R inputs are normally held high. When the S input is pulsed low, the Q output will be set high. When R is pulsed low, the Q output will be reset low. If the S-R inputs are taken low simultaneously, the Q output is unpredictable.

The devices are characterized over full military temperature range of -55°C to +125°C.



FEATURES

■ 1.2μ CMOS

   - Latchup immune

■ High speed

■ Low power consumption

■ Single 5 volt supply

■ Available QML Q or V processes

■ Flexible package

   - 16-pin DIP

   - 16-lead flatpack

■ UT54ACS279- SMD 5962-96580

■ UT54ACTS279 - SMD 5962-96581



 


Description : Strain Relief Bushes

[pro-POWER]

Features:
• A range of strain relief bushes to protect and securely anchor cables for through
   panel entry / exit. Manufactured in black nylon 66. Flame retardant
• Cuts assembly cost, prolongs cord life. Used extensively for protecting cords of
   computers, apparatus, etc

Description : Two-wire serial interface (2k EEPROM 256-word x 8-bit) 4k EEPROM (512-word x 8-bit)

Description

HN58X24xx series are two-wire serial interface EEPROM (Electrically Erasable and Programmable ROM). They realize high speed, low power consumption and a high level of reliability by employing advanced MNOS memory technology and CMOS process and low voltage circuitry technology. They also have a 32-byte page programming function to make their write operation faster.



Features

•  Single supply: 1.8 V to 5.5 V

•  Two-wire serial interface (I2C™ serial bus)

•  Clock frequency: 400 kHz

•  Power dissipation:

   -Standby: 3 µA(max)

   -Active (Read): 1 mA(max)

   -Active (Write): 3 mA(max)

•  Automatic page write: 32-byte/page

•  Write cycle time: 10 ms (2.7 V to 5.5 V )/15ms (1.8 V to 2.7 V )

•  Endurance: 105 Cycles (Page write mode)

•  Data retention: 10 Years

•  Small size packages: TSSOP-8pin and SOP-8pin


Description : CRYSTAL CLOCK OSCILLATORS LVDS PATENT PENDING

Description
The SR-A2D30 Series of quartz crystal oscillators provides a LVDS compatible signal. This device uses multiple ground pins for improved signal integrity.

Features
• Wide frequency range - 250.0MHz to 750.0MHz
• Patent Pending, harmonic multiplication for extremely low jitter
• High frequency output eliminates the need for PLL multiplication
• Stabilities over temperatures as low as ±20ppm eliminates SAW oscillator temperature problems
• 3.3V and 2.5V version available
• High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions
• User specified tolerance available
• Cover connected to ground
• Will withstand SMD reflow temperatures of 183°C for 4 minutes maximum
• High shock resistance, to 1000g

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]