Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Description : Radiation Hardened, 9A, Non-Inverting Power MOSFET Driver

The Radiation Hardened ISL74422BRH is a non-inverting, monolithic high-speed MOSFET Driver designed to convert a 5V CMOS logic input signal into a high current output at voltages up to 18V. Its fast rise/fall times and high current output allow very quick control of even the largest Power MOSFETs in high frequency applications.



Features

• QML Qualified per MIL-PRF-38535 Requirements

• Electrically Screened to DSCC SMD # 5962-03248

Radiation Environment

   - Total Dose (Max) . . . . . . . . . . . . . . . . . . . . 300krad(SI)

   - Latch-Up Immune

• IPEAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9A (Min)

• TFALL (CL = 10nF) . . . . . . . . . . . . . . . . . . . . . 135ns (Max)

• TRISE (CL = 10nF) . . . . . . . . . . . . . . . . . . . . . 135ns (Max)

• Prop Delay High-Low (CL = 10nF) . . . . . . . . . 175ns (Max)

• Prop Delay Low-High (CL = 10nF) . . . . . . . . . 175ns (Max)

• Rising UVLO Threshold . . . . . . . . . . . . . . . . . . 7.5V (Max)

• Falling UVLO Threshold. . . . . . . . . . . . . . . . . . .6.0V (Min)

• UVLO Hysteresis . . . . . . . . . . . . . . . . . . . . . . . .0.3V (Min)

• Wide Supply Voltage Range . . . . . . . . . . . . . . . 8V to 18V

• Low Stand-by Current Consumption

   - Input Low . . . . . . . . . . . . . . . . . . . . . . . . . .2.1mA (Max)

   - Input High . . . . . . . . . . . . . . . . . . . . . . . . . .2.7mA (Max)

  

Applications

• Switching Power Supplies

• DC/DC Converters

• Motor Controllers



 


Description : Radiation Hardened 9A, Non-Inverting Power MOSFET Drivers

Radiation Hardened 9A, Non-Inverting Power MOSFET Drivers

The Radiation Hardened ISL74422ARH is a non-inverting, monolithic high-speed MOSFET Driver designed to convert a CMOS level input signal into a high current output at voltages up to 18V. Its fast rise times and high current output allow very quick control of even the largest Power MOSFETs in high frequency applications.

Features
• QML Qualified per MIL-PRF-38535 Requirements
• Electrically Screened to DSCC SMD # 5962-01521
Radiation Environment
    - Total Dose (Max) . . . . . . . . . . . . . .300krad(SI)
    - Latch-Up Immune
• IPEAK . . . . . . . . . . . . . . . . . . . . . . . . . .9A(Min)
• TF (CL = 10,000pF) . . . . . . . 70ns(Typ); 90ns(Max)
• TR (CL = 10,000pF) . . . . .90ns(Typ); 105ns(Max)
• Prop Delay High-Low (CL = 10,000pF)
    . . . . . . . . . . . . . . . . . . . .75ns(Max), 55ns(Typ)
• Prop Delay Low-High (CL = 10,000pF)
    . . . . . . . . . . . . . . . . . . . .50ns(Max), 30ns(Typ)
• Consistent Delay Times with VCC Changes
• Wide Supply Voltage Range . . . . . . . . . 7V to 18V
• Low Stand-by Power Consumption
    - Input Low. . . . . . . . . . . . . . . . . . <2mW(Max)
    - Inputs High. . . . . . . . . . . . . . . . <18mW(Max)
• ESD Protected . . . . . . . . . . . . . . . . . . . .>1750V

Applications
• Switching Power Supplies
• DC/DC Converters
• Motor Controllers

Description : T-1 lamp,visible-infrared. 5.0V, 0.150A.

T-1 Lamps, Visible-Infrared

Part Name(s) : JANSR2N7281
Intersil
Intersil
Description : Radiation Hardened, N-Channel Power MOSFET

The Intersil has designed a series of SECOND GENERATION Hardened Power MOSFETs of both NChannel and P-Channel enhancement types with ratings from 100V to 500V, 1A to 60A, and on resistance as low as 25mΩ. Total dose hardness is offered at 100K RAD (Si) and 1000K RAD (Si) with neutron hardness ranging from 1E13 for 500V product to 1E14 for 100V product. Dose rate hardness (GAMMA DOT) exists for rates to 1E9 without current limiting and 2E12 with current limiting.

Features
• 2A, 500V, rDS(ON) = 2.50Ω
• Total Dose
    - Meets Pre-RAD Specifications to 100K RAD (Si)
• Dose Rate
    - Typically Survives 3E9 RAD (Si)/s at 80% BVDSS
    - Typically Survives 2E12 if Current Limited to IDM
• Photo Current
    - 8nA Per-RAD (Si)/s Typically
• Neutron
    - Maintain Pre-RAD Specifications for 3E12 Neutrons/cm2
    - Usable to 3E13 Neutrons/cm2

International Rectifier
International Rectifier
Description : Radiation Hardened Power MOSFET THRU-HOLE


Renesas Electronics
Renesas Electronics
Description : High-Speed Switching Use Nch Power MOS FET

Features
• Drive voltage : 10 V
• VDSS : 450 V
• rDS(ON) (max) : 0.73 Ω
• ID : 10 A

Applications
    DC-DC, PDP, lamp ballast, etc.

Description : Radiation Hardened Quad Differential Line Driver

Radiation Hardened Quad Differential Line Driver

Intersil’s Satellite Applications Flow™ (SAF) devices are fully tested and guaranteed to 100kRAD total dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of reliability.

Features
• QML Class T, Per MIL-PRF-38535
•  Radiation Performance
    - Gamma Dose . . . . . . . . . . . . . . . . . . . . 1 x 105 RAD(Si)
    - SEU and SEL . . . . . . . . . . Immune to 100MeV/mg/cm2
• EIA RS-422 Compatible Outputs (Except for IOS)
• CMOS Compatible Inputs
• High Impedance Outputs when Disabled or Powered Down
• Low Power Dissipation 2.75mW Standby (Max)
• Single 5V Supply
• Low Output Impedance 10Ω or Less
• Full -55oC to +125oC Military Temperature Range

Description : Radiation Hardened Quad Differential Line Driver

The Intersil HS-26C31RH, HS-26C31EH are quad differential line Drivers designed for digital data transmission over balanced lines and meets the requirements of EIA standard RS-422. Radiation Hardened CMOS processing assures low Power consumption, high speed, and reliable operation in the most severe Radiation environments.

The HS-26C31RH, HS-26C31EH accept CMOS levels and converts them to RS-422 compatible outputs. These circuits uses special outputs that enable the Drivers to Power-down without loading down the bus. Enable and disable pins allow several devices to be connected to the same data source and addressed independently.



Features

• Electrically screened to SMD #5962-96663

• QML qualified per MIL-PRF-38535 requirements

• 1.2 Micron Radiation Hardened CMOS

- Total dose up to . . . . . . . . . . . . . . . . . . . . . . . . 300kRAD(Si)

• Latchup free

• EIA RS-422 compatible outputs (except for IOS)

• CMOS inputs

• High impedance outputs when disabled or Powered down

• Low Power dissipation. . . . . . . . . . . . 2.75mW standby (max)

• Single 5V supply

• Low output impedance . . . . . . . . . . . . . . . . . . . . . .10Ω or less

• Full -55°C to +125°C military temperature range



Applications

• Line transmitter for MIL-STD-1553 serial data bus


Description : Radiation Hardened Quad Differential Line Driver

Intersil’s Satellite Applications Flow™ (SAF) devices are fully tested and guaranteed to 100kRAD total dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of reliability.

The Intersil HS-26CT31RH-T is a Quad Differential Line Driver designed for digital data transmission over balanced lines and meets the requirements of EIA Standard RS-422. Radiation Hardened CMOS processing assures low Power consumption, high speed, and reliable operation in the most severe Radiation environments.

The HS-26CT31RH-T accepts TTL inputs and converts them to RS-422 compatible outputs. This circuit uses special outputs that enable the Drivers to Power down without loading down the bus. Enable and disable pins allow several devices to be connected to the same data source and addressed independently.



Features

• QML Class T, Per MIL-PRF-38535

Radiation Performance

   - Gamma Dose . . . . . . . . . . . . . . . . . . . . 1 x 105 RAD(Si)

   - SEU and SEL . . . . . . . . . . Immune to 100MeV/mg/cm2

• EIA RS-422 Compatible Outputs (Except for IOS)

• TTL Compatible Inputs

• High Impedance Outputs when Disabled or Powered Down

• Low Power Dissipation 2.75mW Standby (Max)

• Single 5V Supply

• Low Output Impedance 10Ω or Less

• Full -55oC to 125oC Military Temperature Range



 


Description : Radiation-Hardened MicroController

INTRODUCTION

The UT69RH051 is a Radiation-tolerant 8-bit microcontroller that is pin equivalent to the MCS-51 industry standard microcontroller when in a 40-pin DIP. The UT69RH051’s static design allows operation from 1Hz to 20MHz. This data sheet describes hardware and software interfaces to the UT69RH051.



FEATURES

❐ Three 16-bit timer/counters

   - High speed output

   - Compare/capture

   - Pulse width modulator

   - Watchdog timer capabilities

❐ 256 bytes of on-chip data RAM

❐ 32 programmable I/O lines

❐ 7 interrupt sources

❐ Programmable serial channel with:

   - Framing error detection

   - Automatic address recognition

❐ TTL and CMOS compatible logic levels

❐ 64K external data and program memory space

❐ MCS-51 fully compatible instruction set

❐ Flexible clock operation

   - 1Hz to 20MHz with external clock

   - 2MHz to 20MHz using internal oscillator with external crystal

Radiation-Hardened process and design; total dose irRadiation testing MIL-STD-883 Method 1019

   - Total dose: 1.0E6 rads(Si)

   - Latchup immune

❐ Packaging options:

   - 40-pin 100-mil center DIP (0.600 x 2.00)

   - 44-lead 25-mil center Flatpack (0.670 x 0.800)

❐ Standard Microcircuit Drawing 5962-95638 available

   - QML Q & V compliant



 


12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]