Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
OKI
Oki Electric Industry
Description : 5 x 7 Dot Character x 16-DIGIT x 2-Line DISPLAY Controller/Driver with Character RAM

GENERAL DESCRIPTION
The ML9203-xx is a 5 x 7 dot matrix type vacuum fluorescent DISPLAY tube controller driver IC which DISPLAYs characters, numerics and symbols of a maximum of 16 DIGITs x 2 lines.
Dot matrix vacuum fluorescent DISPLAY tube drive signals are generated by serial data sent from a micro-controller. A DISPLAY system is easily realized by internal ROM and RAM for character DISPLAY.

FEATURES
• Logic power supply (VDD) : 3.3 V±10% or 5.0 V±10%
• VFD tube drive power supply (VDISP) : 20 to 60 V
• VFD driver output current
    (VFD driver output can be connected directly to the VFD tube.
    No pull-down resistor is required.)
    - Segment driver (SEGA1 to A35, SEGB1 to B35)
        Only one driver output is high : –5 mA (VDISP=60V)
        All the driver outputs are high : –350 mA (VDISP=60V)
    - Segment driver (ADA, ADB) : –20 mA (VDISP=60V)
    - Grid driver (COM1 to 16) : –50 mA (VDISP=60V)
• Content of DISPLAY
    SEGA1 to SEGA35 and ADA
    - CGROM_A 5x7 dots : 240 types (character data)
    - CGRAM_A 5x7 dots : 16 types (character data)
    - ADRAM_A 16 (DISPLAY DIGIT) x 1 bit (symbol data; can be used for a cursor.)
    - DCRAM_A 16 (DISPLAY DIGIT) x 8 bits(register for character data DISPLAY)
    SEGB1 to SEGB35 and ADB
    - CGROM_B 5x7 dots : 240 types (character data)
    - CGRAM_B 5x7 dots : 16 types (character data)
    - ADRAM_B 16 (DISPLAY DIGIT) x 1 bit (symbol data; can be used for a cursor.)
    - DCRAM_B 16 (DISPLAY DIGIT) x 8 bits(register for character data DISPLAY)
DISPLAY control function
    - DISPLAY DIGIT : 1 to 16 DIGITs
    - DISPLAY duty (brightness adjustment) : 0 to 1024 stages
    - All lights ON/OFF
• 3 interfaces with microcontroller : DA, CS, CP (4 interfaces when RESET is added)
• Built-in oscillation circuit
    Crystal oscillation or ceralock oscillation : 4.0 MHz (Typ)
• Package options:
    100-pin plastic QFP (QFP100-P-1420-0.65-BK) (Product name: ML9203-xxGA)

Part Name(s) : PT6301 PT6301
PTC
Princeton Technology
Description : 5 x 7 Dot Character x 20-DIGIT x 2-Line DISPLAY Controller/Driver with Character RAM

DESCRIPTION
The PT6301 is a 5 × 7 dot matrix type vacuum fluorescent DISPLAY tube controller driver IC which DISPLAYs characters, numerics and symbols of a maximum of 20 DIGITs × 2 lines. Dot matrix vacuum fluorescent DISPLAY tube drive signals are generated by serial data sent from a micro-controller.
A DISPLAY system is easily realized by internal ROM and RAM for character DISPLAY. PT6301 has low power consumption since it is made by CMOS process technology. Custom codes are provided on customer’s request.

FEATURES
• Logic power supply (VDD): 3.3V±10% or 5.0V±10%
• VFD tube drive power supply (VDISP ): 30 to 60V
• VFD driver output current(VFD driver output can be connected directly to the VFD tube. No pull-down resistor is required.)
    - Segment driver (SEGA1 to A35, SEGB1 to B35)
        Only one driver output is high: -5mA @ VDISP-4V (VDISP=50V, Tj=25℃ )
        All the driver outputs are high: -350mA @ VDISP-4V (VDISP=50V, Tj=25℃ )
    - Segment driver (ADA, ADB): -15mA @ VDISP-4V (VDISP=50V, Tj=25℃ )
    - Grid driver (COM1 to 20): -40mA @ VDISP-4V (VDISP=50V, Tj=25℃ )
• Content of DISPLAY SEGA1 to SEGA35 and ADA
    - CGROM_A 5 × 7 dots: 240 types (character data)
    - CGRAM_A 5 × 7 dots: 16 types (character data)
    - ADRAM_A 20 (DISPLAY DIGIT) × 1 bit (symbol data; can be used for a cursor.)
    - DCRAM_A 20 (DISPLAY DIGIT) × 8 bits (register for character data DISPLAY) SEGB1 to SEGB35 and ADB
    - CGROM_B 5 × 7 dots: 240 types (character data)
    - CGRAM_B 5 × 7 dots: 16 types (character data)
    - ADRAM_B 20 (DISPLAY DIGIT) × 1 bit (symbol data; can be used for a cursor.)
    - DCRAM_B 20 (DISPLAY DIGIT) × 8 bits (register for character data DISPLAY)
DISPLAY control function
    - DISPLAY DIGIT: 1 to 20 DIGITs
    - DISPLAY duty (brightness adjustment): 0/1024 to 960/1024 stages
    - All lights ON/OFF
• 4 interfaces with microcontroller : DA, CS, CP, and RESET
• Built-in oscillation circuit (external R & C)
• Standby function
    Inhibiting the oscillator circuit provides low power consumption.
• Built-in CIG testing circuit
• Available in CIG package type

OKI
Oki Electric Industry
Description : 5 × 7 Dot Character × 24-DIGIT × 2-Line DISPLAY Controller/Driver with Character RAM (Built-in Key Scan)

GENERAL DESCRIPTION
The ML9204-xx is a 5 × 7 dot matrix type vacuum fluorescent DISPLAY tube controller driver IC which DISPLAYs characters, numerics and symbols of a maximum of 24 DIGITs × 2 lines.
Dot matrix vacuum fluorescent DISPLAY tube drive signals are generated by serial data sent from a micro-controller. A DISPLAY system is easily realized by internal ROM and RAM for character DISPLAY.

FEATURES
• Logic power supply (VDD) : 3.3 V±10% or 5.0 V±10%
• VFD tube drive power supply (VSEG, VCOM ) : 20 to 60 V
• VFD driver output current
    (VFD driver output can be connected directly to the VFD tube. No pull-down resistor is required.)
    • Segment driver (SEGA1 to A35, SEGB1 to B35)
        Only one driver output is high : –5 mA (VSEG = 60 V)
        All the driver outputs are high : –350 mA (VSEG = 60 V)
    • Segment driver (ADA, ADB) : –15 mA (VSEG = 60 V)
    • Grid driver (COM1 to 24) : –25 mA (VCOM = 60 V)
• Content of DISPLAY
    SEGA1 to SEGA35 and ADA
    • CGROM_A : 5 × 7 dots 240 types (character data)
    • CGRAM_A : 5 × 7 dots 16 types (character data)
    • ADRAM_A : 24 (DISPLAY DIGIT)× 1 bit (symbol data; can be used for a cursor.)
    • DCRAM_A : 24 (DISPLAY DIGIT) × 8 bits (register for character data DISPLAY)
    SEGB1 to SEGB35 and ADB
    • CGROM_B : 5 × 7 dots 240 types (character data)
    • CGRAM_B : 5 × 7 dots 16 types (character data)
    • ADRAM_B : 24 (DISPLAY DIGIT)× 1 bit (symbol data; can be used for a cursor.)
    • DCRAM_B : 24 (DISPLAY DIGIT) × 8 bits (register for character data DISPLAY)
DISPLAY control function
    • GCRAM : Simultaneous output of COM1 to 24 can be set in 1 grid.
    • DISPLAY DIGITs : 1 to 24 DIGITs (9- to 24-bit arbitrary setting)
    • DISPLAY duty (brightness adjustment) : 0/1024 to 960/1024 stages
    • All lights ON/OFF
• 5 interfaces with microcontroller:DI/O, CS, CP, RESET, INT
• Built-in key scan circuit for 5 × 6 matrix key switch
• Built-in key scan circuit for 3-channel encoder type rotary switch
• Built-in oscillation circuit
    Crystal oscillation or ceramic oscillation: 4.0 MHz (Typ)
• Standby function
    Inhibiting the oscillator circuit provides low power consumption.
• Package options:
    128-pin plastic QFP (QFP128-P-1420-0.50-K) (ML9204-xxGA)

OKI
Oki Electric Industry
Description : 5 x 7 Dot Character x 16-DIGIT DISPLAY Controller/Driver with Character RAM

GENERAL DESCRIPTION
The ML9206-xx is a dot matrix vacuum fluorescent DISPLAY tube controller driver IC which DISPLAYs characters, numerics and symbols.
Dot matrix vacuum fluorescent DISPLAY tube drive signals are generated by serial data sent from a micro-controller. A DISPLAY system is easily realized by internal ROM and RAM for character DISPLAY.
The ML9206-xx has low power consumption since it is made by CMOS process technology.
-01 is available as a general-purpose code. Custom codes are provided on customers request.

FEATURES
• Logic power supply and vacuum fluorescent DISPLAY tube drive power supply (VDD) : 3.3 V±10% or 5.0 V±10%
• Fluorescent DISPLAY tube drive power supply (VFL) : –20 to –60 V
• VFD driver output current (VFD driver output can be connected directly to the fluorescent DISPLAY tube. No pull-down resistor is required.)
    - Segment driver (SEG1 to SEG35) : –6 mA (VFL=–60V)
    - Segment driver (AD1 and AD2) : –15 mA (VFL=–60V)
    - Grid driver (COM1 to COM16) : –30 mA (VFL=–60V)
• General output port output current
    - Output driver (P1 and P2) : ±1 mA (VDD=3.3V±10%) ±2 mA (VDD=5.0V±10%)
• Content of DISPLAY
    - CGROM 5·7 dots : 248 types (character data)
    - CGRAM 5·7 dots : 8 types (character data)
    - ADRAM 16 (DISPLAY DIGIT) ·2 bits (symbol data)
    - DCRAM 16 (DISPLAY DIGIT) ·8 bits (register for character data DISPLAY)
    - General output port 2 bits (static operation)
DISPLAY control function
    - DISPLAY DIGIT : 1 to 16 DIGITs
    - DISPLAY duty (brightness adjustment) : 256 stages
    - All lights ON/OFF
• 3 interfaces with microcontroller : DA, CS, CP (4 interfaces when RESET is added)
• 1-byte instruction execution (excluding data write and DISPLAY duty set mode to RAM)
• Built-in oscillation circuit (external R and C)
• Package options:
    64-pin plastic QFP (QFP64-P-1414-0.80-BK) (Product name : ML9206-xxGS-BK)
    64-pin plastic SSOP (SSOP64-P-525-0.80-K) (Product name : ML9206-xxGS-K)
                                                                              xx indicates the code number.

OKI
Oki Electric Industry
Description : 5 ×7 Dot Character ×24-DIGIT DISPLAY Controller/Driver with Character RAM

GENERAL DESCRIPTION

The ML9207-xx is a dot matrix vacuum fluorescent DISPLAY tube controller driver IC which DISPLAYs characters, numerics and symbols. Dot matrix vacuum fluorescent DISPLAY tube drive signals are generated by serial data sent from a micro-controller. A DISPLAY system is easily realized by internal ROM and RAM for character DISPLAY. The ML9207-xx has low power consumption since it is made by CMOS process technology. -01 is available as a general-purpose code. Custom codes are provided on customer's request.





FEATURES

• Logic power supply (VDD)  : 3.3 V ±10% or 5.0 V ±10%

• Fluorescent DISPLAY tube drive power supply (VDISP)  : 3.3 V ±10% or 5.0 V ±10%

• Fluorescent DISPLAY tube drive power supply (VFL)  : –20 to –60 V

• VFD driver output current

 (VFD driver output can be connected directly to the fluorescent DISPLAY tube. No pull-down resistor is required.)

 • Segment driver (SEG1 to SEG35)  : –5.0 mA  (VFL= –60 V)

 • Segment driver (AD1 to AD4)  : –10.0 mA  (VFL= –60 V)

 • Grid driver (COM1 to COM24)  : –50.0 mA  (VFL= –60 V)

• General output port output current

 Output driver (P1 to P4)  : ±1.0 mA (VDD= 3.3 V±10%)   ±2.0 mA (VDD= 5.0 V±10%)

• Content of DISPLAY

• CGROM  5 ×7 dots  : 240 types (character data)

• CGRAM  5 ×7 dots  : 16 types (character data)

 • ADRAM  24 (DISPLAY DIGIT) ×4 bits (symbol data)

 • DCRAM  24 (DISPLAY DIGIT) ×8 bits (register for character data DISPLAY)

 • General output port  4 bits (static operation)

DISPLAY control function

 • DISPLAY DIGIT  : 9 to 24 DIGITs

 • DISPLAY duty (brightness adjustment)  : 0/1024 to 960/1024

 • All lights ON/OFF

• 4 interfaces with microcontroller  : DA, CS, CP, RESET

• 1-byte instruction execution (excluding data write to RAM and DISPLAY duty set)

• Built-in oscillation circuit

• Crystal oscillation or ceramic oscillation

•Package options:

 80-pin QFP package (QFP80-P-1414-0.65-K)  (Product name : ML9207-xxGP)

 80-pin QFP package (QFP80-P-1420-0.80-BK)  (Product name : ML9207-xxGA)

                                        xx indicates the code number.


OKI
Oki Electric Industry
Description : 5 x 7 Dot Character x 16-DIGIT DISPLAY Controller/Driver with Character RAM

GENERAL DESCRIPTION
The ML9205-01 is a dot matrix vacuum fluorescent DISPLAY tube controller driver IC which DISPLAYs characters, numerics and symbols.
Dot matrix vacuum fluorescent DISPLAY tube drive signals are generated by serial data sent from a micro-controller. A DISPLAY system is easily realized by internal ROM and RAM for character DISPLAY.

FEATURES
• Logic power supply (VDD) : 3.3 V±10% or 5.0 V±10%
• Fluorescent DISPLAY tube drive power supply (VDISP) : 3.3 V±10% or 5.0 V±10%
• Fluorescent DISPLAY tube drive power supply (VFL) : –20 to –60 V
• VFD driver output current
    (VFD driver output can be connected directly to the fluorescent DISPLAY tube. No pull-down resistor is required.)
    · Segment driver (SEG1 to SEG35) : –5.0 mA (VFL= –60 V)
    · Segment driver (AD1 to AD4) : –10.0 mA (VFL= –60 V)
    · Grid driver (COM1 to COM24) : –50.0 mA (VFL= –60 V)
• General output port output current
    · Output driver (P1 to P4) : ±1.0 mA (VDD = 3.3 V±10%) ±2.0 mA (VDD = 5.0 V±10%)
• Content of DISPLAY
    · CGROM 5 x 7 dots : 240 types (character data)
    · CGRAM 5 x 7 dots : 16 types (character data)
    · ADRAM 24 (DISPLAY DIGIT) x 4 bits(symbol data)
    · DCRAM 24 (DISPLAY DIGIT) x 8 bits(register for character data DISPLAY)
    · General output port 4 bits (static operation)
DISPLAY control function
    · DISPLAY DIGIT : 9 to 24 DIGITs
    · DISPLAY duty (brightness adjustment) : 8 stages
    · All lights ON/OFF
• 3 interfaces with microcontroller : DA, CS, CP (4 interfaces when RESET is added)
• 1-byte instruction execution (excluding data write to RAM)
• Built-in oscillation circuit (external R and C)
• Package options:
    80-pin QFP package (QFP80-P-1414-0.65-K) (Product name : ML9205-01GP)
    80-pin QFP package (QFP80-P-1420-0.80-BK)(Product name : ML9205-01GA)

OKI
Oki Electric Industry
Description : 5 × 7 Dot Character × 16-DIGIT DISPLAY Controller/Driver with Character RAM

GENERAL DESCRIPTION
The ML9208-xx is a dot matrix vacuum fluorescent DISPLAY tube controller driver IC which DISPLAYs characters, numerics and symbols.
Dot matrix vacuum fluorescent DISPLAY tube drive signals are generated by serial data sent from a micro-controller.
A DISPLAY system is easily realized by internal ROM and RAM for character DISPLAY.

FEATURES
• Logic power supply and vacuum fluorescent DISPLAY tube drive power supply (VDD)
     : 3.3 V ±10% or 5.0 V ±10%
• Fluorescent DISPLAY tube drive power supply (VFL) : VDD –20 V to VDD –42 V
• VFD driver output current
    (VFD driver output can be connected directly to the fluorescent DISPLAY tube.
    No pull-down resistor is required.)
    - Segment driver (SEG1 to SEG35) : –6 mA (VFL = VDD –42 V)
    - Segment driver (AD1 and AD2) : –15 mA (VFL = VDD –42 V)
    - Grid driver (COM1 to COM16) : –30 mA (VFL = VDD –42 V)
• General output port output current
    - Output driver (P1 and P2) : ±1 mA (VDD = 3.3 V ±10%)
                                                  ±2 mA (VDD = 5.0 V ±10%)
• Content of DISPLAY
    - CGROM 5 × 7 dots : 248 types (character data)
    - CGRAM 5 × 7 dots : 8 types (character data)
    - ADRAM 16 (DISPLAY DIGIT) × 2 bits (symbol data)
    - DCRAM 16 (DISPLAY DIGIT) × 8 bits (register for character data DISPLAY)
    - General output port 2 bits (static operation)
DISPLAY control function
    - DISPLAY DIGIT : 9 to 16 DIGITs
    - DISPLAY duty (contrast adjustment) : 8 stages
    - All lights ON/OFFs
• 3 interfaces with microcontroller : DA, CS, CP (4 interfaces when RESET is added)
• 1-byte instruction execution (excluding data write to RAM)
• Built-in oscillation circuit (external R and C)
• Package options:
    64-pin plastic QFP (QFP64-P-1414-0.80-BK) (ML9208-xxGA)
    64-pin plastic SSOP (SSOP64-P-525-0.80-K) (ML9208-xxMB)

OKI
Oki Electric Industry
Description : 5 x 7 Dot Character x 16-DIGIT DISPLAY Controller/Driver with Character RAM

GENERAL DESCRIPTION
The MSM9202-01 is a dot matrix vacuum fluorescent DISPLAY tube controller driver IC which DISPLAYs characters, numerics and symbols.
Dot matrix vacuum fluorescent DISPLAY tube drive signals are generated by serial data sent from a micro-controller. A DISPLAY system is easily realized by internal ROM and RAM for character DISPLAY.

FEATURES
• Logic power supply and vacuum fluorescent DISPLAY tube drive power supply (VDD) : 3.3 V±10% or 5.0 V±10%
• Fluorescent DISPLAY tube drive power supply (VFL) : –20 to –60 V
• VFD driver output current (VFD driver output can be connected directly to the fluorescent DISPLAY tube. No pull-down resistor is required.)
    - Segment driver (SEG1 to SEG35) : –6 mA (VFL=–60V)
    - Segment driver (AD1 and AD2) : –15 mA (VFL=–60V)
    - Grid driver (COM1 to COM16) : –30 mA (VFL=–60V)
• General output port output current
    - Output driver (P1 and P2) : ±1 mA (VDD=3.3V±10%) ±2 mA (VDD=5.0V±10%)
• Content of DISPLAY
    - CGROM 5·7 dots : 248 types (character data)
    - CGRAM 5·7 dots : 8 types (character data)
    - ADRAM 16 (DISPLAY DIGIT) ·2 bits (symbol data)
    - DCRAM 16 (DISPLAY DIGIT) ·8 bits (register for character data DISPLAY)
    - General output port 2 bits (static operation)
DISPLAY control function
    - DISPLAY DIGIT : 9 to 16 DIGITs
    - DISPLAY duty (contrast adjustment) : 8 stages
    - All lights ON/OFF
• 3 interfaces with microcontroller : DA, CS, CP (4 interfaces when RESET is added)
• 1-byte instruction execution (excluding data write to RAM)
• Built-in oscillation circuit (external R and C)
• Package options:
    64-pin plastic QFP (QFP64-P-1414-0.80-BK) (Product name : MSM9202-01GS-BK)
    64-pin plastic SSOP (SSOP64-P-525-0.80-K) (Product name : MSM9202-01GS-K)

LAPIS
LAPIS Semiconductor Co., Ltd.
Description : 5 x 7 Dot Character x 16-DIGIT DISPLAY Controller/Driver with Character RAM

GENERAL DESCRIPTION
The ML9208-xx is a dot matrix vacuum fluorescent DISPLAY tube controller driver IC which DISPLAYs characters, numerics and symbols.
Dot matrix vacuum fluorescent DISPLAY tube drive signals are generated by serial data sent from a micro-controller.
A DISPLAY system is easily realized by internal ROM and RAM for character DISPLAY.

FEATURES
• Logic power supply and vacuum fluorescent DISPLAY tube drive power supply (VDD)
    : 3.3 V ±10% or 5.0 V ±10%
• Fluorescent DISPLAY tube drive power supply (VFL) : VDD –20 V to VDD –42 V
• VFD driver output current
    (VFD driver output can be connected directly to the fluorescent DISPLAY tube.
    No pull-down resistor is required.)
    - Segment driver (SEG1 to SEG35) : –6 mA (VFL = VDD –42 V)
    - Segment driver (AD1 and AD2) : –15 mA (VFL = VDD –42 V)
    - Grid driver (COM1 to COM16) : –30 mA (VFL = VDD –42 V)
• General output port output current
    - Output driver (P1 and P2) : ±1 mA (VDD = 3.3 V ±10%)
                                                  ±2 mA (VDD = 5.0 V ±10%)
• Content of DISPLAY
    - CGROM 5 x 7 dots : 248 types (character data)
    - CGRAM 5 x 7 dots : 8 types (character data)
    - ADRAM 16 (DISPLAY DIGIT) x 2 bits (symbol data)
    - DCRAM 16 (DISPLAY DIGIT) x 8 bits (register for character data DISPLAY)
    - General output port 2 bits (static operation)
DISPLAY control function
    - DISPLAY DIGIT : 9 to 16 DIGITs
    - DISPLAY duty (contrast adjustment) : 8 stages
    - All lights ON/OFFs
• 3 interfaces with microcontroller : DA, CS, CP (4 interfaces when RESET is added)
• 1-byte instruction execution (excluding data write to RAM)
• Built-in oscillation circuit (external R and C)
• Package options:
    64-pin plastic QFP (QFP64-P-1414-0.80-BK) (ML9208-xxGA)
    64-pin plastic SSOP (SSOP64-P-525-0.80-K) (ML9208-xxMB)

LAPIS
LAPIS Semiconductor Co., Ltd.
Description : 5 x 7 Dot Character x 16-DIGIT DISPLAY Controller/Driver with Character RAM

GENERAL DESCRIPTION
The ML9208A-xx is a dot matrix vacuum fluorescent DISPLAY tube controller driver IC which DISPLAYs characters, numerics and symbols.
Dot matrix vacuum fluorescent DISPLAY tube drive signals are generated by serial data sent from a micro-controller.
A DISPLAY system is easily realized by internal ROM and RAM for character DISPLAY.

FEATURES
• Logic power supply and vacuum fluorescent DISPLAY tube drive power supply (VDD)
    : 3.3 V ± 0.3V or 5.0 V ± 0.5V
• Fluorescent DISPLAY tube drive power supply (VFL) : VDD –20 V to VDD –42 V
• VFD driver output current
    (VFD driver output can be connected directly to the fluorescent DISPLAY tube.
    No pull-down resistor isrequired.)
    - Segment driver (SEG1 to SEG35) : –6 mA (VFL = VDD –42 V)
    - Segment driver (AD1 and AD2) : –15 mA (VFL = VDD –42 V)
    - Grid driver (COM1 to COM16) : –30 mA (VFL = VDD –42 V)
• General output port output current
    - Output driver (P1 and P2) : ±1 mA (VDD = 3.3 V ± 0.3V)
                                                  ±2 mA (VDD = 5.0 V ± 0.5V)
• Content of DISPLAY
    - CGROM 5 x 7 dots : 248 types (character data)
    - CGRAM 5 x 7 dots : 8 types (character data)
    - ADRAM 16 (DISPLAY DIGIT) x 2 bits (symbol data)
    - DCRAM 16 (DISPLAY DIGIT) x 8 bits (register for character data DISPLAY)
    - General output port 2 bits (static operation)
DISPLAY control function
    - DISPLAY DIGIT : 9 to 16 DIGITs
    - DISPLAY duty (contrast adjustment) : 16 stages
    - All lights ON/OFFs
• 3 interfaces with microcontroller : DA, CS, CP (4 interfaces when RESET is added)
• 1-byte instruction execution (excluding data write to RAM)
• Built-in oscillation circuit (external R and C)
• Package options:
    64-pin plastic QFP (QFP64-P-1414-0.80-BK) (ML9208A-xxGA)
    64-pin plastic SSOP (SSOP64-P-525-0.80-K) (ML9208A-xxMB)
    64-pin plastic TQFP (TQFP64-P-1010-0.50-K) (ML9208A-xxTB)

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]