Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Description : Surface Mount TRANSZORB® TRANSIENT VOLTAGE SUPPRESSORs

Surface Mount TRANSZORB® TRANSIENT VOLTAGE SUPPRESSORs



FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in uni-directional and bi-directional

• 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C

• Solder dip 260 °C, 40 s

• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC



TYPICAL APPLICATIONS

    Use in sensitive electronics protection against VOLTAGE TRANSIENTs induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial and telecommunication.


 


Description : Surface Mount TRANSZORB® TRANSIENT VOLTAGE SUPPRESSORs

Surface Mount TRANSZORB® TRANSIENT VOLTAGE SUPPRESSORs



FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in uni-directional and bi-directional 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % (300 W above 91 V)

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C

• Solder dip 260 °C, 40 s

• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC



TYPICAL APPLICATIONS

Use in sensitive electronics protection against VOLTAGE TRANSIENTs induced byinductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial and telecommunication.



 


Description : SC−74 FIVE TRANSIENT VOLTAGE SUPPRESSOR 350 W PEAK POWER

5−Line TRANSIENT VOLTAGE SUPPRESSOR Array



This 5−line VOLTAGE TRANSIENT SUPPRESSOR array is designed for application requiring TRANSIENT VOLTAGE protection capability. It is intended for use in over−TRANSIENT VOLTAGE and ESD sensitive equipment such as computers, printers, automotive electronics, networking communication and other applications. This device features a monolithic common anode design which protects five independent lines in a single SC−74 package.



Features

• Protects up to 5 Lines in a Single SC−74 Package

• Peak Power Dissipation − 350 W (8 X 20 μs Waveform)

• ESD Rating of Class 3B (Exceeding 8.0 kV) per Human Body Model and Class C (Exceeding 400 V) per Machine Model

• Compliance with IEC 61000−4−2 (ESD) 15 kV (Air), 8.0 kV (Contact)

• Flammability Rating of UL 94 V−0

• Pb−Free Package is Available



Applications

• Hand−Held Portable Applications

• Networking and Telecom

• Automotive Electronics

• Serial and Parallel Ports

• Notebooks, Desktops, Servers



 


Description : TSOP−6 FIVE TRANSIENT VOLTAGE SUPPRESSOR 350 W PEAK POWER

5-Line TRANSIENT VOLTAGE SUPPRESSOR Array

This 5−line VOLTAGE TRANSIENT SUPPRESSOR array is designed for application requiring TRANSIENT VOLTAGE protection capability. It is intended for use in over−TRANSIENT VOLTAGE and ESD sensitive equipment such as computers, printers, automotive electronics, networking communication and other applications. This device features a monolithic common anode design which protects five independent lines in a single TSOP−6 package.

Features
• Protects up to 5 Lines in a Single TSOP−6 Package
• Peak Power Dissipation − 350 W (8 X 20 μs Waveform)
• ESD Rating of Class 3B (Exceeding 8.0 kV) per Human Body Model and Class C (Exceeding 400 V) per Machine Model
• Compliance with IEC 61000−4−2 (ESD) 15 kV (Air), 8.0 kV (Contact)
• Flammability Rating of UL 94 V−0
• These are Pb−Free Devices

Applications
• Hand−Held Portable Applications
• Networking and Telecom
• Automotive Electronics
• Serial and Parallel Ports
• Notebooks, Desktops, Servers

ON-Semiconductor
ON Semiconductor
Description : SC−74 FIVE TRANSIENT VOLTAGE SUPPRESSOR 350 W PEAK POWER

5−Line TRANSIENT VOLTAGE SUPPRESSOR Array



This 5−line VOLTAGE TRANSIENT SUPPRESSOR array is designed for application requiring TRANSIENT VOLTAGE protection capability. It is intended for use in over−TRANSIENT VOLTAGE and ESD sensitive equipment such as computers, printers, automotive electronics, networking communication and other applications. This device features a monolithic common anode design which protects five independent lines in a single SC−74 package.



Features

• Protects up to 5 Lines in a Single SC−74 Package

• Peak Power Dissipation − 350 W (8 X 20 μs Waveform)

• ESD Rating of Class 3B (Exceeding 8.0 kV) per Human Body Model and Class C (Exceeding 400 V) per Machine Model

• Compliance with IEC 61000−4−2 (ESD) 15 kV (Air), 8.0 kV (Contact)

• Flammability Rating of UL 94 V−0

• Pb−Free Package is Available



Applications

• Hand−Held Portable Applications

• Networking and Telecom

• Automotive Electronics

• Serial and Parallel Ports

• Notebooks, Desktops, Servers



 


Part Name(s) : PJDLC05C-02
PanJit
PANJIT INTERNATIONAL
Description : ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

VOLTAGE POWER 5.0 Volts 200 Watts



This TRANSIENT overVOLTAGE SUPPRESSOR is intended to protect sensitive equipment against electrostatic discharge events as well to offer a minimum insertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applications. This

dual TRANSIENT VOLTAGE SUPPRESSOR comes in a single SOT-23, offering board space reduction, where the application requires it.

This device comes with two pairs of high speed switching diodes connected in series, where both pairs are electrically isolated, offering a very low capacitance, minimizing the insertion losses in data transmission lines.



FEATURES

• Maximum capacitance @ 0 Vdc Bias of 1.0 pF between terminals 1-3 or terminals 2-3

• IEC61000-4-2 esd 15kV Air, 8kV contact compliance

• In compliance with EU RoHS 2002/95/EC directives


Part Name(s) : PJDLC05W
PanJit
PANJIT INTERNATIONAL
Description : ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

VOLTAGE POWER 5 Volts 120 Watts



This TRANSIENT overVOLTAGE SUPPRESSOR is intended to prodect sensitive equipment againset electrostatic discharge events as well to offer a minmum lnsertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applicatons. This dual TRANSIENT VOLTAGE SUPPRESSOR comes in a single SOT-323, offering borard space reduction, where the application requires it.



FEATURES

• Improved leakage current, maximum of 20 µA @ 5Vdc

• Maximum capacitance @ 0 Vdc Bias of 1.2 pF between terminals 1-3 or terminals 2-3

• IEC61000-4-2 esd 15kV Air, 8kV contact compliance

• IEC61000-4-5 lightning 5 Amps peak, 8x20 usec waveform

• In compliance with EU RoHS 2002/95/EC directives


Part Name(s) : PJDLC05C-03
PanJit
PANJIT INTERNATIONAL
Description : ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

VOLTAGE POWER 5.0 Volts 250 Watts



This TRANSIENT overVOLTAGE SUPPRESSOR is intended to protect sensitive equipment against electrostatic discharge events as well to offer a minimum insertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applications. This

dual TRANSIENT VOLTAGE SUPPRESSOR comes in a single SOT-23, offering board space reduction, where the application requires it. This device comes with two pairs of high speed switching diodes

connected in series, where both pairs are electrically isolated, offering a very low capacitance, minimizing the insertion losses in data transmission lines.



FEATURES

• Maximum capacitance @ 0 Vdc Bias of 1.0 pF between terminals 1-3 or terminals 2-3

• IEC61000-4-2 esd 15kV Air, 8kV contact compliance

• In compliance with EU RoHS 2002/95/EC directives

 


Part Name(s) : PJDLC05C-05
PanJit
PANJIT INTERNATIONAL
Description : ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

VOLTAGE POWER 5.0 Volts 400 Watts



This TRANSIENT overVOLTAGE SUPPRESSOR is intended to protect sensitive equipment against electrostatic discharge events as well to offer a minimum insertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applications. This

dual TRANSIENT VOLTAGE SUPPRESSOR comes in a single SOT-23, offering board space reduction, where the application requires it.

This device comes with two pairs of high speed switching diodes connected in series, where both pairs are electrically isolated, offering a very low capacitance, minimizing the insertion losses in data transmission lines.



FEATURES

• Maximum capacitance @ 0 Vdc Bias of 1.0 pF between terminals 1-3 or terminals 2-3

• IEC61000-4-2 esd 15kV Air, 8kV contact compliance

• In compliance with EU RoHS 2002/95/EC directives


Description : ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

ULTRA LOW CAPACITANCE DUAL TRANSIET VOLTAGE SUPPRESSOR FOR HIGH SPEED DATA LINES

This TRANSIENT overVOLTAGE SUPPRESSOR is intended to prodect sensitive equipment againset electrostatic discharge events as well to offer a minmum lnsertion loss in data transmission lines in communications ports used in portable consumer, computing and networking applicatons. This dual TRANSIENT VOLTAGE SUPPRESSOR comes in a single SOT-23, offering borard space reduction, where the application requires it.

FEATURES
• Improved leakage current, maximum of 5 µA @ 5Vdc
• Maximum capacitance @ 0 Vdc Bias of 1.2 pF between terminals 1-3 or terminals 2-3
• IEC61000-4-2 esd 15kV Air, 8kV contact compliance
• IEC61000-4-5 lightning 17 Amps peak, 8x20 usec waveform
• Pb free product are available : 99% Sn above can meet RoHS environment substance directive request

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]