Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Description : Universal RADPAL

PRODUCT DESCRIPTION
The UT22VP10 RADPAL is a fuse programmable logic array device. The familiar sum-of-products (AND-OR) logic structure is complemented with a programmable macrocell. The UT22VP10 is available in 24-pin DIP, 24-lead flatpack, and 28-lead quad-flatpack package offerings providing up to 22 inputs and 10 outputs. Amorphous silicon anti-fuse technology provides the programming of each output. The user specifies whether each of the potential outputs is registered or combinatorial. Output polarity is also individually selected, allowing for greater flexibility for output configuration. A unique output enable function allows the user to configure bidirectional I/O on an individual basis.
The UT22VP10 architecture implements variable sum terms providing 8 to 16 product terms to outputs. This feature provides the user with increased logic function flexibility. Other features include common synchronous preset and asynchronous reset. These features eliminate the need for performing the initialization function.

FEATURES
❐ High speed Universal RADPAL
   - tPD: 15.5ns, 20ns, 25ns maximum
   - fMAX1: 33MHz maximum external frequency
   - Supported by industry-standard programmer
   - Amorphous silicon anti-fuse
❐ Asynchronous and synchronous RADPAL operation
   - Synchronous PRESET
   - Asynchronous RESET
❐ Up to 22 input and 10 output drivers may be configured
   - CMOS & TTL-compatible input and output levels
   - Three-state output drivers
❐ Variable product terms, 8 to 16 per output
❐ 10 user-programmable output macrocells
   - Registered or combinatorial operation
   - Output driver polarity control selectable
   - Two feedback paths available

❐ Radiation-hardened process and design; total dose irradiation testing to MIL-STD-883, Method 1019
   - Total dose: 1.0E6 rads(Si)
   - Upset threshold 50 MeV-cm2/mg (min)
   - Latchup immune(LET>109 MeV-cm2/mg)
❐ QML Q & V compliant
❐ Packaging options:
   - 24-pin 100-mil center DIP (0.300 x 1.2)
   - 24-lead flatpack (.45 x .64)
   - 28-lead quad-flatpack (.45 x .45)
❐ Standard Military Drawing 5962-94754 available

Description : Universal RADPAL

PRODUCT DESCRIPTION
The UT22VP10 RADPAL is a fuse programmable logic array device. The familiar sum-of-products (AND-OR) logic structure is complemented with a programmable macrocell. The UT22VP10 is available in 24-pin DIP, 24-lead flatpack, and 28-lead quad-flatpack package offerings providing up to 22 inputs and 10 outputs. Amorphous silicon anti-fuse technology provides the programming of each output. The user specifies whether each of the potential outputs is registered or combinatorial. Output polarity is also individually selected, allowing for greater flexibility for output configuration. A unique output enable function allows the user to configure bidirectional I/O on an individual basis.
The UT22VP10 architecture implements variable sum terms providing 8 to 16 product terms to outputs. This feature provides the user with increased logic function flexibility. Other features include common synchronous preset and asynchronous reset. These features eliminate the need for performing the initialization function.

FEATURES
❐ High speed Universal RADPAL
   - tPD: 15.5ns, 20ns, 25ns maximum
   - fMAX1: 33MHz maximum external frequency
   - Supported by industry-standard programmer
   - Amorphous silicon anti-fuse
❐ Asynchronous and synchronous RADPAL operation
   - Synchronous PRESET
   - Asynchronous RESET
❐ Up to 22 input and 10 output drivers may be configured
   - CMOS & TTL-compatible input and output levels
   - Three-state output drivers
❐ Variable product terms, 8 to 16 per output
❐ 10 user-programmable output macrocells
   - Registered or combinatorial operation
   - Output driver polarity control selectable
   - Two feedback paths available

❐ Radiation-hardened process and design; total dose irradiation testing to MIL-STD-883, Method 1019
   - Total dose: 1.0E6 rads(Si)
   - Upset threshold 50 MeV-cm2/mg (min)
   - Latchup immune(LET>109 MeV-cm2/mg)
❐ QML Q & V compliant
❐ Packaging options:
   - 24-pin 100-mil center DIP (0.300 x 1.2)
   - 24-lead flatpack (.45 x .64)
   - 28-lead quad-flatpack (.45 x .45)
❐ Standard Military Drawing 5962-94754 available

Part Name(s) : PCD5096H PCD5096
Philips Electronics
Philips Electronics
Description : Universal codec

GENERAL DESCRIPTION
The Universal codec combines two high resolution bidirectional analog channels with a DSP in a single chip. Besides the analog interfaces the PCD5096 includes two digital interfaces: an I2C-bus interface allowing an external microcontroller to program the chip, and a 4-wire serial interface compatible with IOM-2 and with DTAM speech compression ICs.

FEATURES
• Applications in digital terminal equipment featuring line interface and/or voice functions
• Digital signal processor performing echo cancellation, codec functions and dial tone detection
• Two independent receive and transmit channels
• Independent programmable gain for all analog inputs and outputs
• Programmable filter correction functions
• Flexible configuration of all functions
• IOM-2 serial data interface (slave mode only)
• Serial data interface to DTAM speech compression ICs
• 400 kHz I2C-bus slave interface (four I2C-bus subaddresses)
• Codec compatible with G.714 CCITT specification
• PCM A-Law/u-Law (G.711 CCITT) and 16-bit linear data
• Dual differential inputs and outputs performing the following functions:
   – Line interface connection
   – Loudspeaker, speaker phone (hands-free)
   – Earpiece, microphone (handset)
• Peripheral interface: two I/O pins
• Separate ringer function
• Tone and ringer generator
• Conference call
• QFP44 package
• Low voltage (2.7 to 3.6 V)
• Low power consumption.

Description : Universal divider

DESCRIPTION
The HEF4751V is a Universal divider (U.D.) intended for use in high performance phase lock loop frequency synthesizer systems. It consists of a chain of counters operating in a programmable feedback mode. Programmable feedback signals are generated for up to three external (fast) ÷ 10/11 prescaler.

Part Name(s) : DBL5021 DBL5021-V
Daewoo Semiconductor
Daewoo Semiconductor
Description : Universal SPEECH NETWORK

Universal SPEECH NETWORK

Part Name(s) : PBL3852
Ericsson
Ericsson
Description : Universal Transmission Circuit

Description
The PBL 3852 is an Universal transmission circuit in bipolar technology that performs all the speech and line interface functions required to implement an electronic telephone set suitable for the majority of existing telephone network requirements

Key Features
• Generates its own supply from the telephone line
• Adaptive to all types of telephone line feeding systems (i.e. 48V 2x200Ω, 60V 2x 600Ω, 48V 2x800Ω)
• Operates down to 2.1V (excl. polarity bridge)
• Adjustable DC-characteristic to the line
• Few inexpensive external components to function
• Easy adaptation for various market needs
• Dialler interface with DC-supply, mute, power -down and DTMF-input
• Confidence tone in the receiver at DTMF-dialling
• ”Soft clipping” that prevents distortion at high transmit signal levels
• Balanced microphone input for dynamic, and electret microphones
• Balanced receiver output for dynamic and magnetic receiver elements
• Transmitter and receiver gain regulation for automatic loop loss compensation (disabled in mute mode)
• Four separate DC supplies for different requirements
• High gain of the receiver facilitates volume control function
• Microphone cut-off function possible by a switch
• All gain and frequency setting networks in Rx, Tx and side tone are referred to ground
• Excellent RFI performance

Part Name(s) : HD63140 HD63140A00
Hitachi -> Renesas Electronics
Hitachi -> Renesas Electronics
Description : Universal PULSE PROCESSOR


Part Name(s) : KA8603 KA8603D
Samsung
Samsung
Description : Universal SPEECH NETWORK

INTRODUCTION

The KA8603 can fulfill the standards of other countries by changing the external component. Dynamic or piezoelectric type can be used with receiver. Each gain is controlled with AGC in accordance with the line current. The KA8603 can be operated down to D.C line 1.6V.



FEATURES

· Independent adjustment of DC resistance and AC impedance.

· ECM or dynamic microphone can be used.

· DTMF signal interface.

· Mute function

· Operates at the low line voltage (1.6V)

· Low or high impedance receiver type can be used.

· Low line current operation. (IL =4mA)



 


Description : Universal Speech Circuit

Description.
PBL 38541 is a monolithic integrated speech transmission circuit for use in electronic telephones or in any other line interface application. High settable supply current for auxiliary functions, up to 6.0 mA (at high line currents). The circuit is designed to accomodate either a low impedance dynamic or an electret microphone. Microphone can be muted separately. Payphone signaling and DTMF dialling tones have a separate input that is controlled by a mute signal.

Key features.
• Minimum number of external components, with two filtered DCsupplies, 7 capacitors and 11 resistors.
• Easy adaption to various market needs.
• Mute control input for operation with DTMF - generator.
• A separate signaling input for payphone and DTMF tones controlled by mute.
• Transmitter and receiver gain regulation for automatic loop loss compensation.
• Extended current and voltage range 4 - 130 mA, down to 2 .2V.
• Differential microphone input for good balance to ground.
• Balanced receiver output stage.
• One stabilized DC - supply for low current CMOS diallers and or electret microphones. One settable current limited supply with 6 mA max. current.
• Short start up time.
• Excellent RFI performance.
• 18 - pin DIP and 20 - pin SO packages.

Description : Universal Speech Circuit

Description.
PBL 38570 is a monolithic integrated speech transmission circuit for use in electronic telephones. It is designed to accomodate either a low impedance dynamic or an electret microphone. A separate input for DTMF dialling tones that is controlled by a mute signal, and a signal summing point at the transmitter input, are available.

Key features.
• Minimum number of external components, 7 capacitors and 11 resistors.
• Easy adaption to various market needs.
• Mute control input for operation with DTMF - generator.
• A separate input for DTMF tones controlled by mute.
• Transmitter and receiver gain regulation for automatic loop loss compensation.
• Extended current and voltage range 5 - 130 mA, down to 2 V.
• Differential microphone input for good balance to ground.
• Balanced receiver output stage.
• Stabilized DC - supplies for low current CMOS diallers and electret microphones.
• 18 - pin DIP and 20 - pin SO packages.
• Short start up time.
• Excellent RFI performance.

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]