Status Information
The status of this Data Sheet is Production Information. CSR Product Data Sheets progress according to the following format:
â– Advance Information:
â– Information for designers concerning CSR product in development. All values specified are the target values of the design.
Minimum and maximum values specified are only given as guidance to the final specification limits and must not be
considered as the final values.
â– Engineering Sample:
â– Information about initial devices. Devices are untested or partially tested prototypes, their status is described in an
Engineering Sample Release Note. All values specified are the target values of the design. Minimum and maximum values
specified are only given as guidance to the final specification limits and must not be considered as the final values.
â– All detailed specifications including pinouts and electrical specifications may be changed by CSR without notice.
3 â– Pre-production Information:
01 â– Pinout and mechanical dimension specifications finalised. All values specified are the target values of the design. Minimum
, 2 and maximum values specified are only given as guidance to the final specification limits and must not be considered as
27 the final values.
r â– All electrical specifications may be changed by CSR without notice.
be â– Production Information:
tem â– Final Data Sheet including the guaranteed minimum and maximum limits for the electrical specifications.
ep â– Production Data Sheets supersede all previous document versions.
ay, S Device Implementation
rid Important Note:
- F As the feature-set of the CSR8635 QFN is firmware build-specific, see the relevant software release note for the exact
.cn implementation of features on the CSR8635 QFN.
t.com Life Support Policy and Use in Safety-critical Applications
in CSR's products are not authorised for use in life-support or safety-critical applications. Use in such applications is done at the sole
lpo discretion of the customer. CSR will not warrant the use of its devices in such applications.
exce CSR Green Semiconductor Products and RoHS Compliance
- CSR8635 QFN devices meet the requirements of Directive 2002/95/EC of the European Parliament and of the Council on the
ou Restriction of Hazardous Substance (RoHS). CSR8635 QFN devices are free from halogenated or antimony trioxide-based flame
.zh retardants and other hazardous chemicals. For more information, see CSR's Environmental Compliance Statement for CSR Green
en Semiconductor Products.
o kev Trademarks, Patents and Licences
gb Unless otherwise stated, words and logos marked with ™ or ® are trademarks registered or owned by CSR plc or its affiliates.
qin Bluetooth ® and the Bluetooth ® logos are trademarks owned by Bluetooth ® SIG, Inc. and licensed to CSR. Other products, services
r and names used in this document may have been trademarked by their respective owners.
fo The publication of this information does not imply that any license is granted under any patent or other rights owned by CSR plc
red and/or its affiliates.
pa CSR reserves the right to make technical changes to its products as part of its development programme.
Pre While every care has been taken to ensure the accuracy of the contents of this document, CSR cannot accept responsibility for any
errors.
Refer to www.csrsupport.com for compliance and conformance to standards information.
Production Information
© Cambridge Silicon Radio Limited 2013
Confidential Information - This Material is Subject to CSR's Non-disclosure Agreement
Page 7 of 105
CS-303725-DSP5
www.csr.com