T2080NXE8MQLB View Datasheet(PDF) - NXP Semiconductors.
Part Name
Description
Manufacturer
T2080NXE8MQLB Datasheet PDF : 186 Pages
| |||
Table 2. Absolute maximum ratings1
Electrical characteristics
Characteristic
Symbol
Max Value
Unit Note
s
7. Caution: LVIN must not exceed LVDD by more than 0.3 V. This limit may be exceeded for a maximum of 20 ms during
power-on reset and power-down sequences.
8. Caution: CVIN and OVIN must not exceed CVDD and OVDD by more than 0.3 V. This limit may be exceeded for a maximum
of 20 ms during power-on reset and power-down sequences.
9. Caution: DVIN must not exceed DVDD by more than 0.3 V. This limit may be exceeded for a maximum of 20 ms during
power-on reset and power-down sequences.
3.1.2 Recommended operating conditions
This table provides the recommended operating conditions for this chip.
NOTE
The values shown are the recommended operating conditions
and proper device operation outside these conditions is not
guaranteed.
Table 3. Recommended operating conditions
Characteristic
Core and platform supply At initial start-up
voltage
During normal operation
PLL supply voltage (core, platform, DDR)
PLL supply voltage (SerDes, filtered from XnVDD)
Fuse programming override supply
Thermal monitor unit supply
eSHDC, MPIC, GPIO, system control and power
management, clocking, debug, IFC, DDRCLK supply, and
JTAG I/O voltage
eSPI
Symbol
VDD
AVDD_CGA1
AVDD_CGA2
AVDD_PLAT
AVDD_D1
AVDD_SDn_PLLn
(n = 1 or 2)
PROG_SFP
TH_VDD
OVDD
CVDD
DMA, DUART, I2C I/O voltage
DVDD
DDR DRAM I/O voltage
DDR3
DDR3L
G1VDD
Table continues on the next page...
Recommended Value Unit Notes
1.025 ± 30 mV
V
1, 2, 3,
7
VID ± 30 mV
V
1, 2, 3,
7
1.8 V ± 90 mV
V
8
1.35 V ± 67 mV
1.80 V ± 90 mV
1.8 V ± 90 mV
1.8 V ± 90 mV
2.5 V ± 125 mV
1.8 V ± 90 mV
2.5 V ± 125 mV
1.8 V ± 90 mV
1.5 V ± 75 mV
1.35 V ± 67 mV
V
—
V
4
V
—
V
—
V
—
V
—
V
—
QorIQ T2080 Data Sheet, Rev. 3, 03/2018
NXP Semiconductors
45
Share Link: 