Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

TXS0102

  

Datasheet

Match, Like TXS0102
Start with TXS0102D* TXS0102Y*
End N/A
Included N/A
View Details    
TXS0102 [2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS ]

other parts : TXS0102DCU  TXS0102DCT  TXS0102DQE  TXS0102YZP  TXS0102DQM  TXS0102DCTR  TXS0102DQER  TXS0102DCUR  TXS0102DCTT  TXS0102YZPR 

TI
Texas Instruments

DESCRIPTION/ORDERING INFORMATION
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

FEATURES
• No Direction-Control Signal Needed
• Max Data Rates
   – 24 Mbps (Push Pull)
   – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at
   GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required –
   Either VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
   – A Port
      – 2500-V Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
   – B Port
      – 8-kV Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
     
TYPICAL LEVEL-SHIFTER APPLICATIONS
• I2C/SMBus
• UART
• GPIO

View
TXS0102DCT [2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS ]

other parts : TXS0102  TXS0102DQE  TXS0102YZP  TXS0102DCU  TXS0102DQM  TXS0102YZPR  TXS0102DCUR  TXS0102DCTT  TXS0102DQMR  TXS0102DCTR 

TI
Texas Instruments

DESCRIPTION/ORDERING INFORMATION
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

FEATURES
• No Direction-Control Signal Needed
• Max Data Rates
   – 24 Mbps (Push Pull)
   – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at
   GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required –
   Either VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
   – A Port
      – 2500-V Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
   – B Port
      – 8-kV Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
     
TYPICAL LEVEL-SHIFTER APPLICATIONS
• I2C/SMBus
• UART
• GPIO

View
TXS0102DCU [2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS ]

other parts : TXS0102  TXS0102DQE  TXS0102YZP  TXS0102DCT  TXS0102DQM  TXS0102YZPR  TXS0102DCUR  TXS0102DCTT  TXS0102DQMR  TXS0102DCTR 

TI
Texas Instruments

DESCRIPTION/ORDERING INFORMATION
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

FEATURES
• No Direction-Control Signal Needed
• Max Data Rates
   – 24 Mbps (Push Pull)
   – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at
   GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required –
   Either VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
   – A Port
      – 2500-V Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
   – B Port
      – 8-kV Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
     
TYPICAL LEVEL-SHIFTER APPLICATIONS
• I2C/SMBus
• UART
• GPIO

View
TXS0102DQE [2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS ]

other parts : TXS0102  TXS0102DCU  TXS0102YZP  TXS0102DCT  TXS0102DQM  TXS0102YZPR  TXS0102DCUR  TXS0102DCTT  TXS0102DQMR  TXS0102DCTR 

TI
Texas Instruments

DESCRIPTION/ORDERING INFORMATION
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

FEATURES
• No Direction-Control Signal Needed
• Max Data Rates
   – 24 Mbps (Push Pull)
   – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at
   GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required –
   Either VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
   – A Port
      – 2500-V Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
   – B Port
      – 8-kV Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
     
TYPICAL LEVEL-SHIFTER APPLICATIONS
• I2C/SMBus
• UART
• GPIO

View
TXS0102DQM [2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS ]

other parts : TXS0102  TXS0102DCU  TXS0102YZP  TXS0102DCT  TXS0102DQE  TXS0102YZPR  TXS0102DCUR  TXS0102DCTT  TXS0102DQMR  TXS0102DCTR 

TI
Texas Instruments

DESCRIPTION/ORDERING INFORMATION
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

FEATURES
• No Direction-Control Signal Needed
• Max Data Rates
   – 24 Mbps (Push Pull)
   – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at
   GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required –
   Either VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
   – A Port
      – 2500-V Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
   – B Port
      – 8-kV Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
     
TYPICAL LEVEL-SHIFTER APPLICATIONS
• I2C/SMBus
• UART
• GPIO

View
TXS0102YZP [2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS ]

other parts : TXS0102  TXS0102DCU  TXS0102DQM  TXS0102DCT  TXS0102DQE  TXS0102YZPR  TXS0102DCUR  TXS0102DCTT  TXS0102DQMR  TXS0102DCTR 

TI
Texas Instruments

DESCRIPTION/ORDERING INFORMATION
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

FEATURES
• No Direction-Control Signal Needed
• Max Data Rates
   – 24 Mbps (Push Pull)
   – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at
   GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required –
   Either VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
   – A Port
      – 2500-V Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
   – B Port
      – 8-kV Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
     
TYPICAL LEVEL-SHIFTER APPLICATIONS
• I2C/SMBus
• UART
• GPIO

View
TXS0102DCTR [2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS ]

other parts : TXS0102  TXS0102DCU  TXS0102DCT  TXS0102DQE  TXS0102YZP  TXS0102DQM  TXS0102DQER  TXS0102DCUR  TXS0102DCTT  TXS0102YZPR 

TI
Texas Instruments

DESCRIPTION/ORDERING INFORMATION
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

FEATURES
• No Direction-Control Signal Needed
• Max Data Rates
   – 24 Mbps (Push Pull)
   – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at
   GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required –
   Either VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
   – A Port
      – 2500-V Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
   – B Port
      – 8-kV Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
     
TYPICAL LEVEL-SHIFTER APPLICATIONS
• I2C/SMBus
• UART
• GPIO

View
TXS0102DCTT [2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS ]

other parts : TXS0102  TXS0102DCU  TXS0102DCT  TXS0102DQE  TXS0102YZP  TXS0102DQM  TXS0102DQER  TXS0102DCUR  TXS0102YZPR  TXS0102DCTR 

TI
Texas Instruments

DESCRIPTION/ORDERING INFORMATION
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

FEATURES
• No Direction-Control Signal Needed
• Max Data Rates
   – 24 Mbps (Push Pull)
   – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at
   GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required –
   Either VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
   – A Port
      – 2500-V Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
   – B Port
      – 8-kV Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
     
TYPICAL LEVEL-SHIFTER APPLICATIONS
• I2C/SMBus
• UART
• GPIO

View
TXS0102DCUR [2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS ]

other parts : TXS0102  TXS0102DCU  TXS0102YZP  TXS0102DQM  TXS0102DQE  TXS0102DCT  TXS0102DCTT  TXS0102YZPR  TXS0102DCTR  TXS0102DQER 

TI
Texas Instruments

DESCRIPTION/ORDERING INFORMATION
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

FEATURES
• No Direction-Control Signal Needed
• Max Data Rates
   – 24 Mbps (Push Pull)
   – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at
   GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required –
   Either VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
   – A Port
      – 2500-V Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
   – B Port
      – 8-kV Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
     
TYPICAL LEVEL-SHIFTER APPLICATIONS
• I2C/SMBus
• UART
• GPIO

View
TXS0102DCUT [2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS ]

other parts : TXS0102  TXS0102DQE  TXS0102DCU  TXS0102DQM  TXS0102DCT  TXS0102YZP  TXS0102DCTT  TXS0102DCUR  TXS0102DCTR  TXS0102DQER 

TI
Texas Instruments

DESCRIPTION/ORDERING INFORMATION
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

FEATURES
• No Direction-Control Signal Needed
• Max Data Rates
   – 24 Mbps (Push Pull)
   – 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™ Package
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at
   GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required –
   Either VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
   – A Port
      – 2500-V Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
   – B Port
      – 8-kV Human-Body Model (A114-B)
      – 250-V Machine Model (A115-A)
      – 1500-V Charged-Device Model (C101)
     
TYPICAL LEVEL-SHIFTER APPLICATIONS
• I2C/SMBus
• UART
• GPIO

View
1
Share Link : 

HOME

Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]