FDC37B78X 查看數據表（PDF） - SMSC -> Microchip

零件编号

产品描述 (功能)

生产厂家

FDC37B78X

Enhanced Super I/O Controller with ACPI Support, Real Time Clock and Consumer IR

SMSC -> Microchip 

OPERATIONAL DESCRIPTION

MAXIMUM GUARANTEED RATINGS

Operating Temperature Range......................................................................................... 0oC to +70oC

Storage Temperature Range..........................................................................................-55o to +150oC

Lead Temperature Range (soldering, 10 seconds) .................................................................... +325oC

Positive Voltage on any pin, with respect to Ground ................................................................Vcc+0.3V

Negative Voltage on any pin, with respect to Ground.................................................................... -0.3V

Maximum Vcc................................................................................................................................. +7V

*Stresses above those listed above could cause permanent damage to the device. This is a stress

rating only and functional operation of the device at any other condition above those indicated in the

operation sections of this specification is not implied.

Note: When powering this device from laboratory or system power supplies, it is important that the

Absolute Maximum Ratings not be exceeded or device failure can result. Some power supplies exhibit

voltage spikes on their outputs when the AC power is switched on or off. In addition, voltage

transients on the AC power line may appear on the DC output. If this possibility exists, it is suggested

that a clamp circuit be used.

DC ELECTRICAL CHARACTERISTICS

(TA = 0°C - 70°C, Vcc = +5 V ± 10%)

PARAMETER

SYMBOL

I Type Input Buffer

Low Input Level

VILI

High Input Level

VIHI

IS Type Input Buffer

Low Input Level

VILIS

High Input Level

VIHIS

Schmitt Trigger Hysteresis

ICLK Input Buffer

VHYS

Low Input Level

VILCK

High Input Level

Input Leakage

(All I and IS buffers)

VIHCK

Low Input Leakage

IIL

High Input Leakage

IIH

MIN TYP

2.0

2.2

250

2.2

-10

-10

218

MAX

0.8

0.8

0.4

+10

+10

UNITS

COMMENTS

V TTL Levels

V

V Schmitt Trigger

V Schmitt Trigger

mV

V

V

µA VIN = 0

µA

VIN = VCC

Share Link: