PIC16LC8X-04 查看數據表（PDF） - Microchip Technology

零件编号

产品描述 (功能)

生产厂家

PIC16LC8X-04

8-Bit CMOS EEPROM Microcontrollers

Microchip Technology 

PIC16C8X

Applicable Devices 83 R83 84 84A R84

11.3 DC CHARACTERISTICS:

DC CHARACTERISTICS

PIC16C84-04 (Commercial, Industrial)

PIC16C84-10 (Commercial, Industrial)

PIC16LC84-04 (Commercial, Industrial)

Standard Operating Conditions (unless otherwise stated)

Operating temperature

-40°C ≤ TA ≤ +85°C for industrial and

0°C ≤ TA ≤ +70°C for commercial

Operating voltage VDD range as described in DC spec Section 11-1

and Section 11-3.

Parameter

No. Sym

Characteristic

Min Typ† Max Units

Conditions

Input Low Voltage

VIL I/O ports

D030

with TTL buffer

D030A

VSS — 0.8

V 4.5 ≤ VDD ≤ 5.5V

VSS — 0.16VDD V entire range (Note 4)

D031

with Schmitt Trigger buffer VSS — 0.2VDD V entire range

D032

MCLR, RA4/T0CKI, OSC1

(RC mode)

Vss — 0.2VDD V

D033

OSC1 (XT, HS and LP modes) Vss — 0.3VDD V Note1

Input High Voltage

VIH I/O ports

D040

with TTL buffer

0.36VDD — VDD

D040A

0.48VDD

D041

with Schmitt Trigger buffer 0.45VDD — VDD

V 4.5 ≤ VDD ≤ 5.5V

entire range (Note 4)

entire range

D042

MCLR, RA4/T0CKI, OSC1 0.85VDD — VDD V

(RC mode)

D043

OSC1 (XT, HS and LP modes) 0.7VDD — VDD V Note1

D050

D070

D060

D061

D063

VHYS Hysteresis of

Schmitt Trigger inputs

IPURB PORTB weak pull-up current

Input Leakage Current

(Notes 2, 3)

IIL I/O ports

MCLR, RA4/T0CKI

OSC1/CLKIN

TBD — —

V

50* 250* 400* µA VDD = 5V, VPIN = VSS

— — ±1 µA Vss ≤ VPIN ≤ VDD,

Pin at hi-impedance

— — ±5 µA Vss ≤ VPIN ≤ VDD

— — ±5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP

osc configuration

Output Low Voltage

D080

VOL I/O ports

—

— 0.6

V IOL = 8.5 mA, VDD = 4.5V

D083

OSC2/CLKOUT

—

— 0.6

V IOL = 1.6 mA, VDD = 4.5V

(RC osc configuration)

Output High Voltage

D090 VOH I/O ports (Note 3)

VDD - 0.7 — —

V IOH = -3.0 mA, VDD = 4.5V

D093

OSC2/CLKOUT

(RC osc configuration)

VDD - 0.7 — —

V IOH = -1.3 mA, VDD = 4.5V

* These parameters are characterized but not tested.

† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only

and are not tested.

Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the

PIC16C84 be driven with external clock in RC mode.

2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels

represent normal operating conditions. Higher leakage current may be measured at different input voltages.

3: Negative current is defined as coming out of the pin.

4: The user may use better of the two specs.

DS30081F-page 74

© 1995 Microchip Technology Inc.

Share Link: