Functional description
STFPC320
4.4
Wake-up
The STFPC320 can wake-up from any one of the following sources:
● Front-panel keys
● Remote-control keys
● Real-time clock (RTC) in 3 conditions (alarm, watchdog timer, oscillator fail)
● External pin PIN_AV8 (only by a low-to-high transition on this pin)
Figure 6. Wake-up
Note: 1 When the hot-key is detected either from front-panel or remote control or RTC or from a low-
to-high transition on PIN_AV8 pin during standby, the STBY pin de-asserts.
2 The de-assertion of the STBY triggers the guard timer.
3 The timer value is the programmed value by the user (1-15s). If the user did not change the
value before entering standby, then it remains 10s.
4 Also note that the guard timer is off when the STFPC320 is in the standby mode.
Guard timer is thus triggered by a de-assertion of the STBY signal or by internal power on
reset signal.
16/78