PIC16LF876AT-I/ML View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16LF876AT-I/ML

28/40/44-Pin Enhanced Flash Microcontrollers

Microchip Technology 

PIC16F87X

15.4 DC Characteristics: PIC16F873/874/876/877-04 (Extended)

PIC16F873/874/876/877-10 (Extended)

DC CHARACTERISTICS

Param

No.

Sym

Characteristic

Standard Operating Conditions (unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +125°C

Operating voltage VDD range as described in DC specification

(Section 15.1)

Min Typ† Max Units

Conditions

D030

D030A

D031

D032

D033

D034

D034A

VIL Input Low Voltage

I/O ports

with TTL buffer

with Schmitt Trigger buffer

MCLR, OSC1 (in RC mode)

OSC1 (in XT, HS and LP)

Ports RC3 and RC4

with Schmitt Trigger buffer

with SMBus

Vss — 0.15VDD V For entire VDD range

Vss — 0.8V V 4.5V ≤ VDD ≤ 5.5V

Vss — 0.2VDD V

VSS — 0.2VDD V

VSS — 0.3VDD V (Note 1)

Vss — 0.3VDD V For entire VDD range

-0.5 — 0.6 V for VDD = 4.5 to 5.5V

VIH Input High Voltage

I/O ports

—

D040

with TTL buffer

2.0

— VDD

D040A

0.25VDD — VDD

+ 0.8V

D041

with Schmitt Trigger buffer 0.8VDD — VDD

D042

MCLR

0.8VDD — VDD

D042A

OSC1 (XT, HS and LP)

0.7VDD — VDD

D043

OSC1 (in RC mode)

0.9VDD — VDD

Ports RC3 and RC4

D044

with Schmitt Trigger buffer 0.7VDD — VDD

D044A

with SMBus

1.4 — 5.5

V 4.5V ≤ VDD ≤ 5.5V

V For entire VDD range

V For entire VDD range

V

V (Note 1)

V

V For entire VDD range

V for VDD = 4.5 to 5.5V

D070A IPURB PORTB Weak Pull-up Current

50 250 400 µA VDD = 5V, VPIN = VSS,

IIL Input Leakage Current(2, 3)

D060

I/O ports

-

-

±1 µA Vss ≤ VPIN ≤ VDD,

Pin at hi-impedance

D061

MCLR, RA4/T0CKI

-

-

±5 µA Vss ≤ VPIN ≤ VDD

D063

OSC1

-

-

±5 µA Vss ≤ VPIN ≤ VDD, XT, HS

and LP osc configuration

* These parameters are characterized but not tested.

† Data in "Typ" column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance

only and are not tested.

Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the

PIC16F87X be driven with external clock in RC mode.

2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified

levels represent normal operating conditions. Higher leakage current may be measured at different input

voltages.

3: Negative current is defined as current sourced by the pin.

 2001 Microchip Technology Inc.

DS30292C-page 159

Share Link: