CWR06KB155KPC View Datasheet(PDF) - Vishay Semiconductors

Part Name

Description

Manufacturer

CWR06KB155KPC

Solid Tantalum Surface Mount Capacitors TANTAMOUNT™ Conformal Coated, Military MIL-PRF-55365/4 Qualified

Vishay Semiconductors 

www.vishay.com

Typical Performance Characteristics

Vishay Sprague

Solid Tantalum Chip Capacitors

MIL-PRF-55365 Qualified and DLA Approved

ELECTRICAL PERFORMANCE CHARACTERISTICS

ITEM

PERFORMANCE CHARACTERISTICS

Category temperature range -55 °C to +85 °C (to +125 °C with voltage derating)

Capacitance tolerance

± 20 %, ± 10 %, tested via bridge method, at 25 °C, 120 Hz

Dissipation factor

Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 120 Hz

ESR

Limit per Standard Ratings table. Tested via bridge method, at 25 °C, 100 kHz

Leakage current

After application of rated voltage applied to capacitors for 5 min using a steady source of power with 1 kΩ

resistor in series with the capacitor under test, leakage current at 25 °C is not more than described in

Standard Ratings table of appropriate datasheet.

Note that the leakage current varies with temperature and applied voltage. See graph below for the

appropriate adjustment factor.

Reverse voltage

Capacitors are capable of withstanding peak voltages in the reverse direction equal to:

10 % of the DC rating at +25 °C

5 % of the DC rating at +85 °C

1 % of the DC rating at +125 °C

Vishay does not recommend intentional or repetitive application of reverse voltage.

Ripple current

For maximum ripple current values calculation (at 25 °C) refer to “Guide to Application” part of product

guide which is linked with relevant datasheet. If capacitors are to be used at temperatures above +25 °C,

the permissible ripple current (or voltage) shall be calculated using the derating factors:

1.0 at +25 °C

0.9 at +85 °C

0.4 at +125 °C

Maximum operating and surge

voltages vs. temperature

RATED VOLTAGE

(V)

+85 °C

SURGE VOLTAGE

(V)

+125 °C

CATEGORY VOLTAGE

(V)

4.0

5.3

2.7

6.3

8.0

4.0

10

13.3

6.7

15 / 16

20

10

20

26.7

13.3

25

33.3

16.7

35

46.7

23.3

50

66.7

33.3

Recommended voltage

derating guidelines

(below 85 °C)

VOLTAGE RAIL

≤ 3.3

5

CAPACITOR VOLTAGE RATING

6.3

10

10

20

12

25

15

35

≥ 24

50 or series configuration

Notes

• All information presented in this document reflects typical performance characteristics

Revision: 21-Jun-17

1

Document Number: 40211

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: