CWR06NB155KTC View Datasheet(PDF) - Vishay Semiconductors

Part Name

Description

Manufacturer

CWR06NB155KTC

Solid Tantalum Surface Mount Capacitors TANTAMOUNT™ Conformal Coated, Military MIL-PRF-55365/4 Qualified

Vishay Semiconductors 

www.vishay.com

Typical Performance Characteristics

Vishay Sprague

MECHANICAL PERFORMANCE CHARACTERISTICS

ITEM

CONDITION

Vibration

MIL-STD-202, method 204, condition D, 10 Hz to 2000 Hz,

20 g peak, in 2 directions, 4 hours in each, at rated voltage

Thermal shock

(mounted)

MIL-STD-202, method 107

-65 °C / +125 °C, for 10 cycles, 30 min at each temperature

Resistance

to soldering heat

MIL-STD-202, method 210, condition J (convection reflow,

235 °C ± 5 °C), one heat cycle

Solderability

Resistance to

solvents

Flammability

MIL-STD-202, method 208, ANSI/J-STD-002, test B

(dip- and look, 245 °C ± 5 °C).

Preconditioning per category C (steam aging, 8 hours).

Does not apply to gold terminations.

MIL-STD-202, method 215

Encapsulation materials meet UL 94 V-0 with an oxygen

index of 32 %

POST TEST PERFORMANCE

Measurements during vibration: During the last cycle

of each plane, electrical measurements shall be made

to determine the intermittent open or short circuits.

Intermittent contact and arcing shall also be

determined.

Measurements after vibration: not applicable

Visual examination after test: there shall be no

evidence of mechanical damage

Capacitance change

Dissipation factor

Leakage current

Within ± 5 % of initial value

Initial specified limit

Initial specified limit

Visual examination: there shall be no evidence of

harmful corrosion, mechanical damage, or

obliteration of marking (if applicable)

Capacitance change

Dissipation factor

Leakage current

Within ± 5 % of initial value

Initial specified limit

Initial specified limit

Visual examination: there shall be no evidence of

mechanical damage

Solder coating of all capacitors shall meet specified

requirements.

There shall be no mechanical or visual damage to

capacitors post-conditioning.

There shall be no mechanical or visual damage to

capacitors post-conditioning. Body marking shall

remain legible and shall not smear.

Revision: 21-Jun-17

3

Document Number: 40211

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: