NAME
GP_INT1
Default = 0x00
on Vbat POR
WDT_UNITS
Default = 0x00
on Vcc POR or
Reset_Drv
WDT_VAL
Default = 0x00
on Vcc POR or
Reset_Drv
REG INDEX
DEFINITION
0xF0
General Purpose I/O Combined Interrupt 1
Bits[2:0] Reserved, = 000
Bit[3] GP IRQ Filter Select
0 = Debounce Filter Bypassed
1 = Debounce Filter Enabled
Bits[7:4] Combined IRQ mapping
1111 = IRQ15
.........
0011 = IRQ3
0010 = Invalid
0001 = IRQ1
0000 = Disable
0xF1
Watch Dog Timer Units
Bits[6:0] Reserved, = 00000
Bit[7] WDT Time-out Value Units Select
= 0 Minutes (default)
= 1 Seconds
STATE
C
C
Note: if the logical device's activate bit is not set
then bits 0 and 1 have no effect.
0xF2 Watch-dog Timer Time-out Value
C
Binary coded, units = minutes(default) or seconds,
selectable via Bit[7] of Reg 0xF1, LD 8.
0x00 Time out disabled
0x01 Time-out = 1 minute/second
.........
0xFF Time-out = 255 minutes/seconds
213