PIC16F870/871
TABLE 3-9: PORTE FUNCTIONS
Name
Bit# Buffer Type
Function
RE0/RD/AN5
bit0
ST/TTL(1) Input/output port pin or read control input in parallel slave port mode or
analog input:
RD
1 = Not a read operation
0 = Read operation. Reads PORTD register (if chip selected)
RE1/WR/AN6
bit1
ST/TTL(1) Input/output port pin or write control input in parallel slave port mode or
analog input:
WR
1 = Not a write operation
0 = Write operation. Writes PORTD register (if chip selected)
RE2/CS/AN7
bit2
ST/TTL(1) Input/output port pin or chip select control input in parallel slave port
mode or analog input:
CS
1 = Device is not selected
0 = Device is selected
Legend: ST = Schmitt Trigger input TTL = TTL input
Note 1: Input buffers are Schmitt Triggers when in I/O mode and TTL buffers when in Parallel Slave Port Mode.
TABLE 3-10: SUMMARY OF REGISTERS ASSOCIATED WITH PORTE
Addr Name Bit 7 Bit 6 Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Value on:
POR,
BOR
Value on all
other resets
09h PORTE
—
—
—
—
—
RE2
RE1
RE0 ---- -xxx
89h TRISE IBF OBF IBOV PSPMODE — PORTE Data Direction Bits 0000 -111
9Fh ADCON1 ADFM —
—
—
PCFG3 PCFG2 PCFG1 PCFG0 --0- 0000
Legend: x = unknown, u = unchanged, - = unimplemented read as '0'. Shaded cells are not used by PORTE.
---- -uuu
0000 -111
--0- 0000
© 1999 Microchip Technology Inc.
Preliminary
DS30569A-page 35