PIC18F8520-IPT301 View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC18F8520-IPT301

64/80-Pin High-Performance, 256 Kbit to 1 MbitEnhanced Flash Microcontrollers with A/D

Microchip Technology 

PIC18F6520/8520/6620/8620/6720/8720

TABLE 26-4: MEMORY PROGRAMMING REQUIREMENTS

DC Characteristics

Standard Operating Conditions (unless otherwise stated)

Operating temperature -40°C  TA  +85°C for industrial

-40°C  TA  +125°C for extended

Param

No.

Sym

Characteristic

Min Typ† Max Units

Conditions

Internal Program Memory

Programming Specifications

(Note 1)

D110 VPP Voltage on MCLR/VPP pin

9.00

— 13.25 V (Note 2)

D112 IPP Current into MCLR/VPP pin

—

—

5

A

D113 IDDP Supply Current during

Programming

—

—

10 mA

Data EEPROM Memory

D120 ED Cell Endurance

100K 1M

— E/W -40C to +85C

D120A ED Cell Endurance

10K 100K

— E/W +85C to +125C

D121 VDRW VDD for Read/Write

VMIN

—

5.5 V Using EECON to read/write

VMIN = Minimum operating

voltage

D122 TDEW Erase/Write Cycle Time

—

4

— ms

D123 TRETD Characteristic Retention

40

—

— Year -40C to +85C (Note 3)

D123A TRETD Characteristic Retention

100

—

— Year 25C (Note 3)

Program Flash Memory

D130 EP Cell Endurance

10K 100K

— E/W -40C to +85C

D130A EP Cell Endurance

1000 10K

— E/W +85C to +125C

D131 VPR VDD for Read

VMIN

—

5.5 V VMIN = Minimum operating

voltage

D132 VIE VDD for Block Erase

4.5

—

5.5 V Using ICSP port

D132A VIW VDD for Externally Timed Erase 4.5

—

5.5 V Using ICSP port

or Write

D132B VPEW VDD for Self-Timed Write

VMIN

—

5.5 V VMIN = Minimum operating

voltage

D133 TIE ICSP Block Erase Cycle Time

—

5

— ms VDD > 4.5V

D133A TIW ICSP Erase or Write Cycle Time 1

(externally timed)

—

— ms VDD > 4.5V

D133A TIW Self-Timed Write Cycle Time

—

2.5

— ms

D134 TRETD Characteristic Retention

40

—

— Year -40C to +85C (Note 3)

D134A TRETD Characteristic Retention

100

—

— Year 25C (Note 3)

† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance

only and are not tested.

Note 1: These specifications are for programming the on-chip program memory through the use of table write

instructions.

2: The pin may be kept in this range at times other than programming, but it is not recommended.

3: Retention time is valid, provided no other specifications are violated.

 2003-2013 Microchip Technology Inc.

DS39609C-page 317

Share Link: