LSM330DL View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

LSM330DL

Linear sensor module 3D accelerometer sensor and 3D gyroscope sensor

STMicroelectronics 

LSM330DL

Registers description

Table 52.

ZD

ZS

YD

YS

XD

XS

CLICK_CFG_A description

Enable interrupt double CLICK on Z-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)

Enable interrupt single CLICK on Z-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)

Enable interrupt double CLICK on Y-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)

Enable interrupt single CLICK on Y-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)

Enable interrupt double CLICK on X-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)

Enable interrupt single CLICK on X-axis. Default value: 0

(0: disable interrupt request; 1: enable interrupt request on measured accel. value

higher than preset threshold)

7.19

CLICK_SRC_A (39h)

Table 53. CLICK_SRC_A register

--

IA

DCLICK SCLICK Sign

Z

Y

X

Table 54. CLICK_SRC_A description

IA

Interrupt active. Default value: 0

(0: no interrupt has been generated; 1: one or more interrupts have been generated)

DCLICK Double CLICK-CLICK enable. Default value: 0 (0: double CLICK-CLICK detection dis-

able, 1: double CLICK-CLICK detection enable)

SCLICK Single CLICK-CLICK enable. Default value: 0 (0: single CLICK-CLICK detection disable,

1: single CLICK-CLICK detection enable)

Sign

CLICK-CLICK Sign. 0: positive detection, 1: negative detection

Z

Z CLICK-CLICK detection. Default value: 0 (0: no interrupt, 1: Z high event has occurred)

Y

Y CLICK-CLICK detection. Default value: 0

(0: no interrupt, 1: Y high event has occurred)

X

X CLICK-CLICK detection. Default value: 0

(0: no interrupt, 1: X high event has occurred)

Doc ID 022018 Rev 1

37/54

Share Link: