M29W800DT70N6F View Datasheet(PDF) - Unspecified

Part Name

Description

Manufacturer

M29W800DT70N6F

8-Mbit (1 Mbit x 8 or 512 Kbits x 16, boot block) 3 V supply flash memory

Unspecified 

M29W800DT, M29W800DB

10 Revision history

Revision history

Table 29. Document revision history

Date

Version

Changes

August 2001

03-Dec-2001

01-Mar-2002

11-Apr-2002

31-Mar-2003

13-Feb-2004

23-Apr-2004

16-Sep-2004

21-Mar-2006

10-Dec-2007

25-Mar-2008

7-April-2009

29-Jan-2018

1.0 First issue

Block protection appendix added, SO44 drawing and package

2.0 mechanical data updated, CFI Table 26, address 39h/72h data clarified,

read/reset operation during erase suspend clarified

Description of Ready/Busy signal clarified (and Figure 14 modified)

3.0 Clarified allowable commands during block erase

Clarified the mode the device returns to in the CFI Read Query command

section

Temperature range 1 added

4.0

Document promoted from preliminary data to full datasheet

Erase suspend latency time (typical and maximum) and data retention

parameters added to Table 6: Program/erase times and program/erase

endurance cycles, and typical after 100k W/E cycles column removed.

Minimum voltage corrected for 70 ns speed class in Table 9: Operating

4.1 and AC measurement conditions.

Logic diagram and data toggle flowchart corrected.

Lead-free package options E and F added to Table 19: Ordering

information scheme.

TSOP48 package outline and mechanical data updated.

5

TFBGA48 6 x 8 mm – 6 x 8 active ball array – 0.80 mm pitch added.

Table 9: Operating and AC measurement conditions updated for 70 ns

speed option.

6 Figure 2: SO connections updated.

7 45 ns speed class added.

8

Removed TFBGA48 (ZA) (6 x 9 mm) package. Converted to new ST

corporate template.

9 Applied Numonyx branding.

10 Minor text changes.

Revised Chip Erase signal value (maximum) in Table 6.: Program/erase

times and program/erase endurance cycles from 60 to 25 seconds.

11 Revised Block Erase (64-Kbytes) signal value (maximum) in Table 6.:

Program/erase times and program/erase endurance cycles from 6 to 1.6

seconds.

12 Added Important Notes and Warnings section for

further clarification aligning to industry standards.

51/52

Share Link: