PIC16F1826-E/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16F1826-E/SO

18/20/28-Pin Flash Microcontrollers with nanoWatt XLP Technology

Microchip Technology 

PIC16F/LF1826/27

12.2.3 PORTA FUNCTIONS AND OUTPUT

PRIORITIES

Each PORTA pin is multiplexed with other functions. The

pins, their combined functions and their output priorities

are briefly described here. For additional information,

refer to the appropriate section in this data sheet.

When multiple outputs are enabled, the actual pin

control goes to the peripheral with the lowest number in

the following lists.

Analog input functions, such as ADC, comparator and

CapSense inputs, are not shown in the priority lists.

These inputs are active when the I/O pin is set for

Analog mode using the ANSELx registers. Digital

output functions may control the pin when it is in Analog

mode with the priority shown below.

RA0

1. SDO2 (PIC16F/LF1827 only)

2. RA0

RA1

1. SS2 (PIC16F/LF1827 only)

2. RA1

RA2

1. DACOUT (DAC)

2. RA2

RA3

1. SRQ (SR latch)

2. CCP3 (PIC16F/LF1827 only)

3. C1OUT (Comparator)

4. RA3

RA4

1. SRNQ (SR latch)

2. CCP4 (PIC16F/LF1827 only)

3. T0CKI

4. C2OUT (Comparator)

5. RA4

RA5

Input only pin.

RA6

1. OSC2 (enabled by Configuration Word)

2. CLKOUT

3. CLKR

4. SDO1

5. P1D

6. P2B (PIC16F/LF1827 only)

7. RA6

RA7

1. OSC1/CLKIN (enabled by Configuration Word)

2. P1C

3. CCP2 (PIC16F/LF1827 only)

4. P2A (PIC16F/LF1827 only)

5. RA7

DS41391C-page 126

Preliminary

 2010 Microchip Technology Inc.

Share Link: