PIC16F1827T-E/ML View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16F1827T-E/ML

18/20/28-Pin Flash Microcontrollers with nanoWatt XLP Technology

Microchip Technology 

PIC16F/LF1826/27

29.4 DC Characteristics: PIC16F/LF1826/27-I/E (Continued)

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature -40°C  TA  +85°C for industrial

-40°C  TA  +125°C for extended

Param

No.

Sym.

VOH

D090

Characteristic

Output High Voltage(4)

I/O ports

Min.

Typ†

VDD - 0.7

—

Capacitive Loading Specs on Output Pins

Max. Units

Conditions

IOH = 3.5mA, VDD = 5V

—

V IOH = 3mA, VDD = 3.3V

IOH = 1mA, VDD = 1.8V

D101* COSC2 OSC2 pin

—

—

15

pF In XT, HS and LP modes when

external clock is used to drive

OSC1

D101A* CIO

All I/O pins

—

—

50

pF

Legend: TBD = To Be Determined

* These parameters are characterized but not tested.

† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are

not tested.

Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended to use an external

clock in RC mode.

2: Negative current is defined as current sourced by the pin.

3: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent

normal operating conditions. Higher leakage current may be measured at different input voltages.

4: Including OSC2 in CLKOUT mode.

 2010 Microchip Technology Inc.

Preliminary

DS41391C-page 355

Share Link: