PIC18LF2220-I/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC18LF2220-I/SO

28/40/44-Pin High-Performance, Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology

Microchip Technology 

PIC18F2220/2320/4220/4320

26.3 DC Characteristics: PIC18F2220/2320/4220/4320 (Industrial)

PIC18LF2220/2320/4220/4320 (Industrial) (Continued)

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for industrial

-40°C ≤ TA ≤ +125°C for extended

Param

No.

Symbol

Characteristic

Min

Max Units

Conditions

VOL Output Low Voltage

D080

I/O ports

D080A

D083

D083A

OSC2/CLKO

(RC mode)

VOH

D090

Output High Voltage(3)

I/O ports

D090A

—

—

—

—

VDD – 0.7

VDD – 0.7

0.6

V IOL = 8.5 mA, VDD = 4.5V,

-40°C to +85°C

0.6

V IOL = 7.0 mA, VDD = 4.5V,

-40°C to +125°C

0.6

V IOL = 1.6 mA, VDD = 4.5V,

-40°C to +85°C

0.6

V IOL = 1.2 mA, VDD = 4.5V,

-40°C to +125°C

—

V IOH = -3.0 mA, VDD = 4.5V,

-40°C to +85°C

—

V IOH = -2.5 mA, VDD = 4.5V,

-40°C to +125°C

D092

D092A

OSC2/CLKO

(RC mode)

D150 VOD

D100(4) COSC2

Open-Drain High Voltage

Capacitive Loading Specs

on Output Pins

OSC2 pin

VDD – 0.7

VDD – 0.7

—

—

V IOH = -1.3 mA, VDD = 4.5V,

-40°C to +85°C

—

V IOH = -1.0 mA, VDD = 4.5V,

-40°C to +125°C

8.5

V RA4 pin

—

15

pF In XT, HS and LP modes

when external clock is

used to drive OSC1

D101 CIO

D102 CB

All I/O pins and OSC2

(in RC mode)

SCL, SDA

—

50

pF To meet the AC Timing

Specifications

—

400

pF In I2C mode

Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the

PICmicro device be driven with an external clock while in RC mode.

2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified

levels represent normal operating conditions. Higher leakage current may be measured at different input

voltages.

3: Negative current is defined as current sourced by the pin.

4: Parameter is characterized but not tested.

 2003 Microchip Technology Inc.

DS39599C-page 319

Share Link: