AD565AS(RevF) View Datasheet(PDF) - Analog Devices

Part Name

Description

Manufacturer

AD565AS
(Rev.:RevF)

High Speed 12-Bit Monolithic D/A Converters

Analog Devices 

AD565A

ABSOLUTE MAXIMUM RATINGS

VCC to Power Ground . . . . . . . . . . . . . . . . . . . . . 0 V to +18 V

VEE to Power Ground (AD565A) . . . . . . . . . . . . 0 V to –18 V

Voltage on DAC Output (Pin 9) . . . . . . . . . . . . –3 V to +12 V

Digital Inputs (Pins 13 to 24) to

Power Ground . . . . . . . . . . . . . . . . . . . . . . –1.0 V to +7.0 V

REF IN to Reference Ground . . . . . . . . . . . . . . . . . . . . ± 12 V

Bipolar Offset to Reference Ground . . . . . . . . . . . . . . . ± 12 V

10 V Span R to Reference Ground . . . . . . . . . . . . . . . . ± 12 V

20 V Span R to Reference Ground . . . . . . . . . . . . . . . . ± 24 V

REF OUT (AD565A) . . . . . Indefinite Short to Power Ground

Momentary Short to VCC

Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . 1000 mW

GROUNDING RULES

The AD565A and AD566A use separate reference and power

grounds to allow optimum connections for low noise and high

speed performance. These grounds should be tied together at one

point, usually the device power ground. The separate ground

returns minimize current flow in low level signal paths. In this

way, logic return currents are not summed into the same return

path with analog signals.

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although the

AD565A/AD566A features proprietary ESD protection circuitry, permanent damage may occur on

devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are

recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE

–6–

REV.F

Share Link: