DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

AD9780-EBZ1 View Datasheet(PDF) - Analog Devices

Part Name
Description
Manufacturer
AD9780-EBZ1 Datasheet PDF : 36 Pages
First Prev 21 22 23 24 25 26 27 28 29 30 Next Last
AD9780/AD9781/AD9783
impacted by this sinc roll-off depending on where the carrier is
placed, as shown in Figure 65.
0
MIX
RETURN-TO-ZERO
–10
NORMAL
–20
–30
–40
0
0.5
1.0
1.5
2.0
(fS)
Figure 65. Transfer Function for Each Analog Operating Mode
Auxiliary DACs
Two auxiliary DACs are provided on the AD9780/AD9781/
AD9783. A functional diagram is shown in Figure 66. The
auxiliary DACs are current output devices with two output
pins, AUXP and AUXN. The active pin can be programmed to
either source or sink current. When either sinking or sourcing,
the full-scale current magnitude is 2 mA. The available compliance
range at the auxiliary DAC outputs depends on whether the output
is configured to sink or source current. When sourcing current,
the compliance voltage is 0 V to 1.6 V, but when sinking current,
the output compliance voltage is reduced to 0.8 V to 1.6 V. Either
output can be used, but only one output of the AUX DAC (P or
N) is active at any time. The inactive pin is always in a high
impedance state (>100 kΩ).
0mA
TO
2mA
VBIAS
AUXP
0mA
TO
2mA
SINK
OR
SOURCE
POSITIVE
OR
NEGATIVE
AUXN
Figure 66. Auxiliary DAC Functional Diagram
In a single sideband transmitter application, the combination of
the input referred dc offset voltage of the quadrature modulator
and the DAC output offset voltage can result in local oscillator
(LO) feedthrough at the modulator output, which degrades system
performance. The auxiliary DACs can be used to remove the dc
offset and the resulting LO feedthrough. The circuit configura-
tion for using the auxiliary DACs for performing dc offset
correction depends on the details of the DAC and modulator
interface. An example of a dc-coupled configuration with low-
pass filtering is shown in Figure 67.
QUADRATURE
MODULATOR V+
AD9783
AUX
DAC1 OR
DAC2
QUAD MOD
I OR Q INPUTS
AD9783
DAC1 OR
DAC2
OPTIONAL
PASSIVE
FILTERING
25TO 50
25TO 50
Figure 67. DAC DC-Coupled to Quadrature Modulator with a Passive DC Shift
Rev. A | Page 28 of 36

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]