ADE7816ACPZ-RL View Datasheet(PDF) - Analog Devices
Part Name
Description
Manufacturer
ADE7816ACPZ-RL Datasheet PDF : 48 Pages
| |||
ADE7816
Data Sheet
Interrupt Enable and Interrupt Status Registers
Table 30. STATUS0 Register (Address 0xE502) and MASK0 Register (Address 0xE50A)
Bits Bit Name Default Value
Description
[31:18] Reserved 0 0000 0000 0000 These bits should be ignored.
17
DREADY 0x0
New waveform data is ready.
16
Reserved 0x0
This bit should be ignored.
15
Reserved 0x0
This bit should be ignored.
14
Reserved 0x0
This bit should be ignored.
13
Reserved 0x0
This bit should be ignored.
12
REVRP3 0x0
The sign of the reactive power has changed (C or F channel).
11
REVRP2 0x0
The sign of the reactive power has changed (B or E channel).
10
REVRP1 0x0
The sign of the reactive power has changed (A or D channel).
9
Reserved 0x0
This bit should be ignored.
8
REVAP3 0x0
The sign of the active power has changed (C or F channel).
7
REVAP2 0x0
The sign of the active power has changed (B or E channel).
6
REVAP1 0x0
The sign of the active power has changed (A or D channel).
5
LENERGY 0x0
The end of a line cycle accumulation period.
4
Reserved 0x0
This bit should be ignored.
3
REHF2
0x0
The active energy register is half full (D, E, or F channel).
2
REHF1
0x0
The reactive energy register is half full (A, B, or C channel).
1
AEHF2
0x0
The active energy register is half full (D, E, or F channel)
0
AEHF1
0x0
The active energy register is half full (A, B, or C channel).
Table 31. STATUS1 Register (Address 0xE503) and MASK1 Register (Address 0xE50B)
Bits Bit Name Default Value
Description
[31:25] Reserved 0x0000000
These bits should be ignored.
24
PKV
0x0
The end of the voltage channel peak detection period.
23
PKI
0x0
The end of the current channel peak detection period.
22
Reserved 0x0
This bit should be ignored.
21
Reserved 0x1
This bit should be ignored.
20
Reserved 0x0
This bit should be ignored.
19
Reserved 0x0
This bit should be ignored.
18
OV
0x0
An overvoltage event has occurred.
17
OI
0x0
An overcurrent event has occurred.
16
Sag
0x0
A sag event has occurred.
15
RSTDONE 0x1
The end of a software or hardware reset.
14
ZXI3
0x0
C or F current channel zero crossing.
13
ZXI2
0x0
B or E current channel zero crossing.
12
ZXI1
0x0
A or D current channel zero crossing.
11
Reserved 0x0
This bit should be ignored.
10
Reserved 0x0
This bit should be ignored.
9
ZXV
0x0
Voltage channel zero crossing.
8
ZXTOI3 0x0
A zero crossing on the C or F current channel is missing.
7
ZXTOI2 0x0
A zero crossing on the B or E current channel is missing.
6
ZXTOI1 0x0
A zero crossing on the A or D current channel is missing.
5
Reserved 0x0
This bit should be ignored.
4
Reserved 0x0
This bit should be ignored.
3
ZXTOV
0x0
A zero crossing on the voltage channel is missing.
2
Reserved 0x0
This bit should be ignored.
1
NLOAD2 0x0
Active and reactive no load condition on the D, E, or F current channel.
0
NLOAD1 0x0
Active and reactive no load condition on the A, B, or C current channel.
Rev. 0 | Page 44 of 48
Share Link: 