P2103SC61TP View Datasheet(PDF) - Teccor Electronics
Part Name
Description
Manufacturer
P2103SC61TP Datasheet PDF : 212 Pages
| |||
Package Dimensions
Package Dimensions
DO-214AA
The DO-214AA package is designed to meet mechanical standards as set forth in JEDEC
publication number 95.
CASE
TEMPERATURE
B
MEASUREMENT
D
POINT
CA
H
F
L
E
J
K
G
.079
(2.0)
.110
(2.8)
.079
(2.0)
PAD OUTLINE
(MM)
Note: A stripe is marked on some parts, to indicate the cathode. IPC-SM-782 recommends 2.4 instead of 2.0.
Dimension
A
B
C
D
E
F
G
H
J
K
L
MIN
0.140
0.205
0.077
0.166
0.036
0.073
0.004
0.077
0.043
0.008
0.039
Inches
MAX
0.155
0.220
0.083
0.180
0.056
0.083
0.008
0.086
0.053
0.012
0.049
Millimeters
MIN
MAX
3.56
3.94
5.21
5.59
1.96
2.11
4.22
4.57
0.91
1.42
1.85
2.11
0.10
0.20
1.95
2.18
1.09
1.35
0.20
0.30
0.99
1.24
Notes:
• Dimensions and tolerances per ASME Y14.5M-1994
• Mold flash shall not exceed 0.13 mm per side.
• Dimensions B and C apply to plated leads.
• All leads are insulated from case. Case is electrically non-conductive. (Rated at 1600 V ac rms for one
minute from leads to case over the operating temperature range)
• Dimension “C” is measured on the flat section of the lead.
© 2002 Teccor Electronics
SIDACtor® Data Book and Design Guide
6-3
http://www.teccor.com
+1 972-580-7777
Share Link: 