C8051F342 View Datasheet(PDF) - Silicon Laboratories

Part Name

Description

Manufacturer

C8051F342

Full Speed USB Flash MCU Family

Silicon Laboratories 

C8051F340/1/2/3/4/5/6/7/8/9/A/B/C/D

23.2. C2 Pin Sharing

The C2 protocol allows the C2 pins to be shared with user functions so that in-system debugging and

Flash programming functions may be performed. This is possible because C2 communication is typically

performed when the device is in the halt state, where all on-chip peripherals and user software are stalled.

In this halted state, the C2 interface can safely ‘borrow’ the C2CK (RST) and C2D (P3.0) pins. Note that

the C2D pin is shared on the 32-pin packages only (C8051F342/3/6/7/9/A/B). In most applications, exter-

nal resistors are required to isolate C2 interface traffic from the user application. A typical isolation configu-

ration is shown in Figure 23.1.

C8051Fxxx

RST (a)

Input (b)

Output (c)

C2CK

C2D

C2 Interface Master

Figure 23.1. Typical C2 Pin Sharing

The configuration in Figure 23.1 assumes the following:

1. The user input (b) cannot change state while the target device is halted.

2. The RST pin on the target device is used as an input only.

Additional resistors may be necessary depending on the specific application.

Rev. 1.3

273

Share Link: