HCS473-I/SLROM(2013) View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

HCS473-I/SLROM
(Rev.:2013)

KEELOQ® 3-Axis Transcoder

Microchip Technology 

HCS473

3.2.2.4 Command Sequence

The transponder reader follows the HCS473’s Field

Acknowledge by sending the desired 3-bit command,

3-bit option or address, associated data and CRC;

each as required. LF commands are Pulse Position

Modulated (PPM) as shown in Figure 3-10. The last bit

(CRC bit) should be followed by leaving the field on for

TFINH.

TFINH should be appropriately adjusted to receive con-

secutive commands or LF responses. See

Section 3.2.4 and Section 3.2.5 for LF response and

consecutive command considerations.

FIGURE 3-11:

HCS473 TRANSPONDER WAKE-UP SEQUENCE

SKIPACK = 0 - Field Acknowledge sent when device wakes

125kHz Field

(on LC pins)

Simultaneous LF

Acknowledge

(LFRSP=1)

TSF

TCMD

Command

Inductive

(LC)

RF

Response

(DATA)

3LFTE 3LFTE 3LFTE

RF Acknowledge

(RFRSP=1)

TCMD

SKIPACK = 1 - Field Acknowledge is not sent

TSFMAX

Inductive

(LC)

Communication from reader to HCS473

Communication from HCS473 to reader

Command

TCMD

DS40035D-page 22

Preliminary

 2000-2013 Microchip Technology Inc.

Share Link: