ST92250JDV2T6 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ST92250JDV2T6

8/16-BIT SINGLE VOLTAGE FLASH MCU FAMILY WITH RAM, E³ ™ (EMULATED EEPROM), CAN 2.0B AND J1850 BLPD

STMicroelectronics 

ST92F124/F150/F250 - ELECTRICAL CHARACTERISTICS

11 ELECTRICAL CHARACTERISTICS

This product contains devices to protect the inputs

against damage due to high static voltages, how-

ever it is advisable to take normal precautions to

avoid application of any voltage higher than the

specified maximum rated voltages.

For proper operation it is recommended that VIN

and VO be higher than VSS and lower than VDD.

Reliability is enhanced if unused inputs are con-

nected to an appropriate logic voltage level (VDD

or VSS).

ABSOLUTE MAXIMUM RATINGS

Power Considerations. The average chip-junc-

tion temperature, TJ, in Celsius can be obtained

from:

TJ = TA + PD x RthJA

Where: TA = Ambient Temperature.

RthJA = Package thermal resistance

(junction-to ambient).

PD = PINT + PPORT.

PINT = IDD x VDD (chip internal power).

PPORT

= Port power dissipation

(determined by the user)

Symbol

Parameter

Value

Unit

VDD

AVDD

AVSS

VIN

VINOD

VAIN

TSTG

⎥IIO⎥

⎥IINJ⎥

⎥ITINJ⎥

Supply Voltage

ADC Reference Voltage

ADC Ground

Input Voltage (all pins except pure open drain I/O pins)

Input Voltage (pure open drain I/O pins)

Analog Input Voltage (ADC inputs)

Storage Temperature

Load Current

Pin Injection Current - Digital and Analog Inputs (1)

Absolute sum of all Pin Injection Current in the device

– 0.3 to 6.5

V

VSS to VDD + 0.3

V

VSS

– 0.3 to VDD + 0.3

V

– 0.3 to 6.5

V

-0.3 to AVDD + 0.3

V

– 55 to +150

°C

10 (2)

mA

10 (2)

mA

100 (2)

mA

Notes:

Stresses above those listed as “absolute maximum ratings“ may cause permanent damage to the device. This is a stress rating only and

functional operation of the device at these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect

device reliability. All voltages are referenced to VSS = 0 V.

Note 1: Pin injection current occurs when the voltage on any pin exceeds the specified range.

Note 2: Value guaranteed by design.

THERMAL CHARACTERISTICS

Symbol

RthJA

Package

LQFP64

PQFP100

LQFP100

Value

47

28

44

Unit

°C/W

375/429

1

Share Link: