M24512-RMN6TG View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
M24512-RMN6TG
STMicroelectronics
M24512-RMN6TG Datasheet PDF : 31 Pages
| |||
DC and AC parameters
M24512-W, M24512-R, M24256-BW, M24256-BR
Table 12. DC characteristics (M24xxx-R)
Symbol
Parameter
Test conditions (see Table 8 and
Table 9)
Min.
Max. Unit
ILI
Input Leakage Current
(SCL, SDA, E2, E1, E0)
VIN = VSS or VCC
device in Stand-by mode
ILO
Output Leakage
Current
VOUT = VSS or VCC, SDA in Hi-Z
ICC Supply Current (Read)
VCC =1.8V, fc = 400kHz (rise/fall
time < 30ns)
ICC0 Supply Current (Write)
ICC1 Standby Supply Current
VIL Input Low Voltage
VIH Input High Voltage
VOL Output Low Voltage
During tW, 1.8V < VCC < 5.5V
VIN = VSS or VCC, VCC = 1.8 V
IOL = 0.7 mA, VCC = 1.8 V
1. Characterized value, not tested in production.
±2
µA
±2
µA
1
mA
5(1)
mA
2
µA
–0.45 0.3 VCC V
0.7VCC VCC+1 V
0.2
V
Table 13. AC characteristics (M24xxx-W, see Table 7 and Table 9)
Symbol Alt.
Parameter
Min.
Max. Unit
fC
fSCL Clock Frequency
400
kHz
tCHCL
tHIGH Clock Pulse Width High
600
ns
tCLCH
tLOW Clock Pulse Width Low
1300
ns
tCH1CH2
tR Clock Rise Time
300
ns
tCL1CL2
tF Clock Fall Time
tDH1DH2(1)
tR
SDA Rise Time
tDL1DL2(1)
tF
SDA Fall Time
300
ns
20
300
ns
20
300
ns
tDXCX tSU:DAT Data In Set Up Time
100
ns
tCLDX tHD:DAT Data In Hold Time
0
ns
tCLQX
tDH Data Out Hold Time
200
ns
tCLQV(2)
tAA Clock Low to Next Data Valid (Access Time)
200
900
ns
tCHDX(3) tSU:STA Start Condition Set Up Time
600
ns
tDLCL tHD:STA Start Condition Hold Time
600
ns
tCHDH tSU:STO Stop Condition Set Up Time
600
ns
tDHDL
tBUF
Time between Stop Condition and Next Start
Condition
1300
ns
tW
tWR Write Time
5
ms
1. Sampled only, not 100% tested.
2. To avoid spurious START and STOP conditions, a minimum delay is placed between SCL=1 and the
falling or rising edge of SDA.
3. For a reSTART condition, or following a Write cycle.
22/31
Share Link: 