M25P05-AVZW6TP View Datasheet(PDF) - Numonyx -> Micron
Part Name
Description
Manufacturer
M25P05-AVZW6TP Datasheet PDF : 52 Pages
| |||
M25P05-A
DC and AC parameters
Table 13. DC characteristics
Symbol
Parameter
Test condition (in addition to
those in Table 10.)
Min
Max Unit
ILI Input leakage current
ILO Output leakage current
ICC1 Standby current
S = VCC, VIN = VSS or VCC
ICC2 Deep power-down current
S = VCC, VIN = VSS or VCC
C = 0.1VCC / 0.9.VCC at 50 MHz,
Q = open
ICC3 Operating current (READ)
C = 0.1VCC / 0.9.VCC at 25 MHz,
Q = open
± 2 µA
± 2 µA
50
µA
5
µA
8
mA
4
mA
ICC4 Operating current (PP)
ICC5 Operating current (WRSR)
ICC6 Operating current (SE)
ICC7 Operating current (BE)
VIL Input low voltage
VIH Input high voltage
VOL Output low voltage
VOH Output high voltage
S = VCC
S = VCC
S = VCC
S = VCC
IOL = 1.6 mA
IOH = –100 µA
15 mA
15 mA
15 mA
15 mA
– 0.5 0.3VCC V
0.7VCC VCC+0.4 V
0.4
V
VCC–0.2
V
Table 14. Instruction times
Test conditions specified in Table 10 and Table 11.
Symbol Alt.
Parameter
Min
Typ
Max Unit
tW
tPP(1)
Write status register cycle time
Page program cycle time (256 bytes)
Page program cycle time (n bytes)
5
15 ms
1.4
5 ms
0.4+n*1/256(2)
tSE
Sector erase cycle time
tBE
Bulk erase cycle time
0.65
3
s
0.85
6
s
1. When using the page program (PP) instruction to program consecutive bytes, optimized timings are
obtained with one sequence including all the bytes versus several sequences of only a few bytes (1 ≤ n ≤
256).
2. tPP=2µs+8µs*[int(n-1)/2+1]+4µs*[int(n-1)/2]+2µs, only in products with process technology code X and Y.
39/52
Share Link: 