M29W128GL60N6E View Datasheet(PDF) - Numonyx -> Micron

Part Name

Description

Manufacturer

M29W128GL60N6E

128 Mbit (16 Mb x 8 or 8 Mbx 16, page, uniform block) 3 V supply Flash memory

Numonyx -> Micron 

Flowcharts

M29W128GH, M29W128GL

2. A Write to Buffer Program Abort and Reset must be issued to return the device in Read mode.

3. When the block address is specified, any address in the selected block address space is acceptable. However when

loading write buffer address with data, all addresses must fall within the selected write buffer page.

4. DQ7 must be checked since DQ5 and DQ7 may change simultaneously.

5. If this flowchart location is reached because DQ5=’1’, then the Write to Buffer Program command failed. If this flowchart

location is reached because DQ1=’1’, then the Write to Buffer Program command aborted. In both cases, the appropriate

reset command must be issued to return the device in Read mode: a Reset command if the operation failed, a Write to

Buffer Program Abort and Reset command if the operation aborted.

6. See Table 10 and Table 11, for details on Write to Buffer Program command sequence.

90/94

Share Link: