M45PE10-VMN6P View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

M45PE10-VMN6P

1 Mbit, low voltage, Page-Erasable Serial Flash memory with byte-alterability and a 50 MHz SPI bus interface

STMicroelectronics 

M45PE10

8

Initial delivery state

Initial delivery state

The device is delivered with the memory array erased: all bits are set to 1 (each byte

contains FFh). All usable Status Register bits are 0.

9

Maximum rating

Stressing the device outside the ratings listed in Table 7 may cause permanent damage to

the device. These are stress ratings only, and operation of the device at these, or any other

conditions outside those indicated in the Operating sections of this specification, is not

implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect

device reliability. Refer also to the STMicroelectronics SURE Program and other relevant

quality documents.

Table 7. Absolute maximum ratings

Symbol

Parameter

Min.

Max. Unit

TSTG

TLEAD

Storage temperature

Lead temperature during soldering

–65

150

°C

See note (1)

°C

VIO

Input and output voltage (with respect to Ground)

–0.6 VCC + 0.6 V

VCC

Supply voltage

–0.6

4.0

V

VESD Electrostatic Discharge Voltage (Human Body model) (2) –2000

2000

V

1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly), the ST ECOPACK®

7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS)

2002/95/EU.

2. JEDEC Std JESD22-A114A (C1=100 pF, R1=1500 Ω, R2=500 Ω)

33/45

Share Link: