MCP4162T-502I/SL View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
MCP4162T-502I/SL Datasheet PDF : 88 Pages
| |||
MCP413X/415X/423X/425X
AC/DC CHARACTERISTICS (CONTINUED)
DC Characteristics
Standard Operating Conditions (unless otherwise specified)
Operating Temperature
–40°C ≤ TA ≤ +125°C (extended)
All parameters apply across the specified operating ranges unless noted.
VDD = +2.7V to 5.5V, 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ devices.
Typical specifications represent values for VDD = 5.5V, TA = +25°C.
Parameters
Sym
Min
Typ Max Units
Conditions
Rheostat
Differential
Non-linearity
MCP41X1
(Note 4, Note 8)
MCP4XX2
devices only
(Note 4)
R-DNL
-0.5
-1.0
-0.375
-0.75
-0.5
-1.0
±0.25 +0.5
+0.5 +1.0
Section 2.0
±0.25 +0.375
+0.5 +0.75
Section 2.0
±0.25 +0.5
+0.25 +1.0
LSb 5 kΩ 8-bit 5.5V, IW = 900 µA
LSb
3.0V (Note 7)
1.8V
LSb
7-bit 5.5V, IW = 900 µA
LSb
3.0V (Note 7)
1.8V
LSb 10 kΩ 8-bit 5.5V, IW = 450 µA
LSb
3.0V (Note 7)
Section 2.0
1.8V
-0.375 ±0.25 +0.375 LSb
-0.75 +0.5 +0.75 LSb
7-bit 5.5V, IW = 450 µA
3.0V (Note 7)
Section 2.0
1.8V
-0.5
±0.25 +0.5
LSb 50 kΩ 8-bit 5.5V, IW = 90 µA
-0.5 ±0.25 +0.5 LSb
3.0V (Note 7)
Section 2.0
1.8V
-0.375 ±0.25 +0.375 LSb
-0.375 ±0.25 +0.375 LSb
7-bit 5.5V, IW = 90 µA
3.0V (Note 7)
Section 2.0
1.8V
-0.5
±0.25 +0.5
LSb 100 kΩ 8-bit 5.5V, IW = 45 µA
-0.5 ±0.25 +0.5 LSb
3.0V (Note 7)
Section 2.0
1.8V
-0.375 ±0.25 +0.375 LSb
-0.375 ±0.25 +0.375 LSb
7-bit 5.5V, IW = 45 µA
3.0V (Note 7)
1.8V
Capacitance (PA)
CAW
—
75
—
pF f =1 MHz, Code = Full-Scale
Capacitance (Pw)
CW
—
120
—
pF f =1 MHz, Code = Full-Scale
Capacitance (PB)
CBW
—
75
—
pF f =1 MHz, Code = Full-Scale
Note 1: Resistance is defined as the resistance between terminal A to terminal B.
2: INL and DNL are measured at VW with VA = VDD and VB = VSS.
3: MCP4XX1 only.
4: MCP4XX2 only, includes VWZSE and VWFSE.
5: Resistor terminals A, W and B’s polarity with respect to each other is not restricted.
6: This specification by design.
7: Non-linearity is affected by wiper resistance (RW), which changes significantly over voltage and
temperature.
8: The MCP4XX1 is externally connected to match the configurations of the MCP41X2 and MCP42X2, and
then tested.
9: POR/BOR is not rate dependent.
10: Supply current is independent of current through the resistor network.
DS22060B-page 8
© 2008 Microchip Technology Inc.
Share Link: 