MSC7119VM1200 View Datasheet(PDF) - Freescale Semiconductor

Part Name

Description

Manufacturer

MSC7119VM1200

Low-Cost 16-bit DSP with DDR Controller and 10/100 Mbps Ethernet MAC

Freescale Semiconductor 

Hardware Design Considerations

3.2.2.2 Case 2

The power-up sequence is as follows:

1. Turn on the VDDIO (3.3 V) supply first.

2. Turn on the VDDC (1.2 V) and VDDM (2.5 V) supplies simultaneously (second).

3. Turn on the VREF (1.25 V) supply last (third).

Note: Make sure that the time interval between the ramp-up of VDDIO and VDDC/VDDM is less than 10 ms.

The power-down sequence is as follows:

1. Turn off the VREF (1.25 V) supply first.

2. Turn off the VDDM (2.5 V) supply second.

3. Turn off the VDDC (1.2 V) supply third.

4. Turn of the VDDIO (3.3 V) supply fourth (last).

Use the following guidelines:

• Make sure that the time interval between the ramp-down for VDDIO and VDDC is less than 10 ms.

• Make sure that the time interval between the ramp-up or ramp-down for VDDC and VDDM is less than 10 ms for

power-up and power-down.

• Refer to Figure 31 for relative timing for Case 2.

Ramp-up

Ramp-down

VDDIO = 3.3 V

VDDM = 2.5 V

<10 ms

<10 ms

<10 ms

Time

Figure 31. Voltage Sequencing Case 2

VREF = 1.25 V

VDDC = 1.2 V

MSC7119 Data Sheet, Rev. 8

44

Freescale Semiconductor

Share Link: