PIC12F617T-IP View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC12F617T-IP Datasheet PDF : 212 Pages
| |||
PIC12F609/615/617/12HV609/615
FIGURE 16-9:
PIC12F615/617/HV615 CAPTURE/COMPARE/PWM TIMINGS (ECCP)
CCP1
(Capture mode)
CC01
CC02
CC03
Note: Refer to Figure 16-3 for load conditions.
TABLE 16-6: PIC12F615/617/HV615 CAPTURE/COMPARE/PWM REQUIREMENTS (ECCP)
Standard Operating Conditions (unless otherwise stated)
Operating Temperature -40°C TA +125°C
Param
No.
Sym
Characteristic
Min
Typ† Max Units Conditions
CC01* TccL CCP1 Input Low Time No Prescaler 0.5TCY + 20 — — ns
With Prescaler
20
— — ns
CC02* TccH CCP1 Input High Time No Prescaler 0.5TCY + 20 — — ns
With Prescaler
20
— — ns
CC03* TccP CCP1 Input Period
3TCY + 40 — — ns N = prescale
N
value (1, 4 or
16)
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
TABLE 16-7: COMPARATOR SPECIFICATIONS
Standard Operating Conditions (unless otherwise stated)
Operating Temperature -40°C TA +125°C
Param
No.
Sym
Characteristics
Min Typ† Max Units Comments
CM01 VOS
Input Offset Voltage(2)
— 5.0 10
mV
CM02 VCM
Input Common Mode Voltage
0
— VDD – 1.5 V
CM03* CMRR Common Mode Rejection Ratio
+55 —
—
dB
CM04* TRT
Response Time(1)
Falling — 150
600
ns
Rising
— 200 1000
ns
CM05* TMC2COV Comparator Mode Change to Output Valid — —
10
s
CM06* VHYS
Input Hysteresis Voltage
— 45
60
mV
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: Response time is measured with one comparator input at (VDD - 1.5)/2 - 100 mV to (VDD - 1.5)/2 + 20 mV.
The other input is at (VDD -1.5)/2.
2: Input offset voltage is measured with one comparator input at (VDD - 1.5V)/2.
DS41302D-page 162
2010 Microchip Technology Inc.
Share Link: 