PIC12F609/615/617/12HV609/615
REGISTER 9-3: VRCON: VOLTAGE REFERENCE CONTROL REGISTER
R/W-0
U-0
CMVREN
—
bit 7
R/W-0
VRR
R/W-0
FVREN
R/W-0
VR3
R/W-0
VR2
R/W-0
VR1
R/W-0
VR0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7
bit 6
bit 5
bit 4
bit 3-0
CMVREN: Comparator Voltage Reference Enable bit(1, 2)
1 = CVREF circuit powered on and routed to CVREF input of the Comparator
0 = 0.6 Volt constant reference routed to CVREF input of the Comparator
Unimplemented: Read as ‘0’
VRR: CVREF Range Selection bit
1 = Low range
0 = High range
FVREN: 0.6V Reference Enable bit(2)
1 = Enabled
0 = Disabled
VR<3:0>: Comparator Voltage Reference CVREF Value Selection bits (0 VR<3:0> 15)
When VRR = 1: CVREF = (VR<3:0>/24) * VDD
When VRR = 0: CVREF = VDD/4 + (VR<3:0>/32) * VDD
Note 1: When CMVREN is low, the CVREF circuit is powered down and does not contribute to IDD current.
2: When CMVREN is low and the FVREN bit is low, the CVREF signal should provide Vss to the comparator.
DS41302D-page 76
2010 Microchip Technology Inc.