PIC12F615-IP View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC12F615-IP

8-Pin Flash-Based, 8-Bit CMOS Microcontrollers

Microchip Technology 

PIC12F609/615/617/12HV609/615

10.0 ANALOG-TO-DIGITAL

CONVERTER (ADC) MODULE

(PIC12F615/617/HV615 ONLY)

The Analog-to-Digital Converter (ADC) allows

conversion of an analog input signal to a 10-bit binary

representation of that signal. This device uses analog

inputs, which are multiplexed into a single sample and

hold circuit. The output of the sample and hold is

connected to the input of the converter. The converter

generates a 10-bit binary result via successive

approximation and stores the conversion result into the

ADC result registers (ADRESL and ADRESH).

The ADC voltage reference is software selectable to

either VDD or a voltage applied to the external reference

pins.

The ADC can generate an interrupt upon completion of

a conversion. This interrupt can be used to wake-up the

device from Sleep.

Figure 10-1 shows the block diagram of the ADC.

FIGURE 10-1:

ADC BLOCK DIAGRAM

Note: The ADRESL and ADRESH registers are

Read Only.

VREF

VDD

VCFG = 0

VCFG = 1

GP0/AN0

GP1/AN1/VREF

GP2/AN2

GP4/AN3

CVREF

0.6V Reference

1.2V Reference

000

001

010

011

100

101

110

CHS

A/D

GO/DONE

ADON

VSS

10

ADFM

0 = Left Justify

1 = Right Justify

10

ADRESH ADRESL

 2010 Microchip Technology Inc.

DS41302D-page 79

Share Link: