PIC16C65B-04E/SO View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16C65B-04E/SO Datasheet PDF : 184 Pages
| |||
PIC16C63A/65B/73B/74B
COMF
Syntax:
Operands:
Operation:
Status Affected:
Description:
Complement f
[ label ] COMF f,d
0 ≤ f ≤ 127
d ∈ [0,1]
(f) → (destination)
Z
The contents of register ’f’ are comple-
mented. If ’d’ is 0, the result is stored
in W. If ’d’ is 1, the result is stored
back in register ’f’.
GOTO
Syntax:
Operands:
Operation:
Status Affected:
Description:
Unconditional Branch
[ label ] GOTO k
0 ≤ k ≤ 2047
k → PC<10:0>
PCLATH<4:3> → PC<12:11>
None
GOTO is an unconditional branch. The
eleven bit immediate value is loaded
into PC bits <10:0>. The upper bits of
PC are loaded from PCLATH<4:3>.
GOTO is a two-cycle instruction.
DECF
Syntax:
Operands:
Operation:
Status Affected:
Description:
Decrement f
[label] DECF f,d
0 ≤ f ≤ 127
d ∈ [0,1]
(f) - 1 → (destination)
Z
Decrement register ’f’. If ’d’ is 0, the
result is stored in the W register. If ’d’
is 1, the result is stored back in
register ’f’.
INCF
Syntax:
Operands:
Operation:
Status Affected:
Description:
Increment f
[ label ] INCF f,d
0 ≤ f ≤ 127
d ∈ [0,1]
(f) + 1 → (destination)
Z
The contents of register ’f’ are incre-
mented. If ’d’ is 0, the result is placed
in the W register. If ’d’ is 1, the result is
placed back in register ’f’.
DECFSZ
Syntax:
Operands:
Operation:
Status Affected:
Description:
Decrement f, Skip if 0
[ label ] DECFSZ f,d
0 ≤ f ≤ 127
d ∈ [0,1]
(f) - 1 → (destination);
skip if result = 0
None
The contents of register ’f’ are decre-
mented. If ’d’ is 0, the result is placed
in the W register. If ’d’ is 1, the result is
placed back in register ’f’.
If the result is 1, the next instruction is
executed. If the result is 0, then a NOP
is executed instead making it a 2 TCY
instruction.
INCFSZ
Syntax:
Operands:
Operation:
Status Affected:
Description:
Increment f, Skip if 0
[ label ] INCFSZ f,d
0 ≤ f ≤ 127
d ∈ [0,1]
(f) + 1 → (destination),
skip if result = 0
None
The contents of register ’f’ are incre-
mented. If ’d’ is 0, the result is placed
in the W register. If ’d’ is 1, the result is
placed back in register ’f’.
If the result is 1, the next instruction is
executed. If the result is 0, a NOP is
executed instead making it a 2 TCY
instruction.
2000 Microchip Technology Inc.
DS30605C-page 103
Share Link: 