PIC16C745/SP View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16C745/SP Datasheet PDF : 158 Pages
| |||
PIC16C745/765
DC Characteristics:
PIC16C745/765 (Commercial, Industrial) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0°C ≤ TA ≤ +70°C for commercial
-40°C ≤ TA ≤ +85°C for industrial
Operating voltage VDD range as described in DC spec
Section 16.1 and Section 16.2
Param
No.
Sym
Characteristic
Min Typ† Max Units
Conditions
Output Low Voltage
D080 VOL I/O ports
0.6
V IOL = 8.5 mA, VDD = 4.35V,
-40°C to +85°C
D083
OSC2/CLKOUT (EC, E4 osc mode)
0.6
V IOL = 1.6 mA, VDD = 4.35V,
-40°C to +85°C
Output High Voltage
D090 VOH I/O ports (Note 3)
VDD-0.7
V IOH = -3.0 mA, VDD = 4.35V,
-40°C to +85°C
D092
OSC2/CLKOUT (EC osc mode)
VDD-0.7
V IOH = -1.3 mA, VDD = 4.35V,
-40°C to +85°C
D150* VOD Open-Drain High Voltage
10.5
V RA4 pin
Capacitive Loading Specs on Out-
put Pins
D100 COSC2 OSC2 pin
15
pF In HS mode when external clock
is used to drive OSC1.
D101 CIO All I/O pins and OSC2 (in EC mode)
50
pF
CVUSB Vusb regulation capacitor
.01
µF + 20%
*These parameters are characterized but not tested.
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested.
Note 1: In EC oscillator mode, the OSC1/CLKIN pin is a Schmitt Trigger input.
2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The specified levels repre-
sent normal operating conditions. Higher leakage current may be measured at different input voltages.
3: Negative current is defined as current sourced by the pin.
© 1999 Microchip Technology Inc.
Advanced Information
DS41124A-page 127
Share Link: 