PIC12F1822T-I/SL View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC12F1822T-I/SL Datasheet PDF : 398 Pages
| |||
PIC12F/LF1822/16F/LF1823
REGISTER 23-2: CCP1AS: CCP1 AUTO-SHUTDOWN CONTROL REGISTER
R/W-0/0
CCP1ASE
bit 7
R/W-0/0
R/W-0/0
R/W-0/0
CCP1AS<2:0>
R/W-0/0
R/W-0/0
PSS1AC<1:0>
R/W-0/0
R/W-0/0
PSS1BD<1:0>
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7
bit 6-4
bit 3-2
bit 1-0
CCP1ASE: CCP1 Auto-Shutdown Event Status bit
1 = A shutdown event has occurred; CCP1 outputs are in shutdown state
0 = CCP1 outputs are operating
CC1PAS<2:0>: CCP1 Auto-Shutdown Source Select bits
000 = Auto-shutdown is disabled
001 = Comparator C1 output low(1)
010 = Comparator C2 output low(1, 2)
011 = Either Comparator C1 or C2 low(1, 2)
100 = VIL on INT pin
101 = VIL on INT pin or Comparator C1 low(1)
110 = VIL on INT pin or Comparator C2 low(1, 2)
111 = VIL on INT pin or Comparator C1 or Comparator C2 low(1, 2)
PSS1AC<1:0>: Pins P1A and P1C Shutdown State Control bits(2)
00 = Drive pins P1A and P1C to ‘0’ (2)
01 = Drive pins P1A and P1C to ‘1’ (2)
1x = Pins P1A and P1C tri-state(2)
PSS1BD<1:0>: Pins P1B and P1D Shutdown State Control bits(2)
00 = Drive pins P1B and P1D to ‘0’
01 = Drive pins P1B and P1D to ‘1’
1x = Pins P1B and P1D tri-state
Note 1: If C1SYNC is enabled, the shutdown will be delayed by Timer1.
2: C2, P1C and P1D available on PIC16F/LF1823 only.
DS41413A-page 222
Preliminary
2010 Microchip Technology Inc.
Share Link: 