PIC16F1828T-I/SL View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16F1828T-I/SL

28/40/44-Pin, Low-Power, High-Performance Microcontrollers with nanoWatt XLP Technology

Microchip Technology 

19.0 COMPARATOR MODULE

Comparators are used to interface analog circuits to a

digital circuit by comparing two analog voltages and

providing a digital indication of their relative magnitudes.

Comparators are very useful mixed signal building

blocks because they provide analog functionality

independent of program execution. The analog

comparator module includes the following features:

• Independent comparator control

• Programmable input selection

• Comparator output is available internally/externally

• Programmable output polarity

• Interrupt-on-change

• Wake-up from Sleep

• Programmable Speed/Power optimization

• PWM shutdown

• Programmable and fixed voltage reference

19.1 Comparator Overview

A single comparator is shown in Figure 19-1 along with

the relationship between the analog input levels and

the digital output. When the analog voltage at VIN+ is

less than the analog voltage at VIN-, the output of the

comparator is a digital low level. When the analog

voltage at VIN+ is greater than the analog voltage at

VIN-, the output of the comparator is a digital high level.

PIC16(L)F1824/1828

FIGURE 19-1:

VIN+

VIN-

SINGLE COMPARATOR

+

Output

–

VIN-

VIN+

Output

Note:

The black areas of the output of the

comparator represents the uncertainty

due to input offsets and response time.

 2010 Microchip Technology Inc.

Preliminary

DS41419B-page 175

Share Link: