PIC16F1828T-I/SL View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16F1828T-I/SL
Microchip Technology
PIC16F1828T-I/SL Datasheet PDF : 419 Pages
| |||
PIC16(L)F1824/1828
TABLE 30-10: COMPARATOR SPECIFICATIONS
Operating Conditions: 1.8V < VDD < 5.5V, -40°C < TA < +125°C (unless otherwise stated).
Param
No.
CM01
CM02
CM03
CM04A
CM04B
CM04C
CM04D
CM05
CM06
*
Note 1:
2:
3:
Sym.
Characteristics
Min. Typ. Max. Units
Comments
VIOFF
Input Offset Voltage(3)
— ±7.5 ±60 mV
VICM
Input Common Mode Voltage
0
—
VDD
V
CMRR Common Mode Rejection Ratio
—
50
—
dB
Response Time Rising Edge
— 400 800 ns High Power Mode, Note 1
TRESP
Response Time Falling Edge
Response Time Rising Edge
— 200 400
— 1200 —
ns High Power Mode, Note 1
ns Low Power Mode, Note 1
Response Time Falling Edge
— 550 —
ns Low Power Mode, Note 1
TMC2OV Comparator Mode Change to
Output Valid*
—
—
10
s
CHYSTER Comparator Hysteresis
—
45
— mV Note 2
These parameters are characterized but not tested.
Response time measured with one comparator input at VDD/2, while the other input transitions
from VSS to VDD.
Comparator Hysteresis is available when the CxHYS bit of the CMxCON0 register is enabled.
High Power mode.
TABLE 30-11: DIGITAL-TO-ANALOG CONVERTER (DAC) SPECIFICATIONS
Operating Conditions: 2.5V < VDD < 5.5V, -40°C < TA < +85°C (unless otherwise stated).
Param
No.
Sym.
Characteristics
Min. Typ. Max. Units
DAC01*
DAC02*
DAC03*
DAC04*
*
Legend:
Note 1:
CLSB
Step Size
— VDD/32 —
V
CACC
Absolute Accuracy
—
— 1/2 LSb
CR
Unit Resistor Value (R)
—
5K
—
CST
Settling Time(1)
—
—
10
s
These parameters are characterized but not tested.
TBD = To Be Determined
Settling time measured while DACR<4:0> transitions from ‘0000’ to ‘1111’.
Comments
FIGURE 30-14: USART SYNCHRONOUS TRANSMISSION (MASTER/SLAVE) TIMING
CK
US121
US121
DT
Note:
US120
Refer to Figure 30-5 for load conditions.
US122
2010 Microchip Technology Inc.
Preliminary
DS41419B-page 375
Share Link: 