PIC16F1828T-I View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16F1828T-I

28/40/44-Pin, Low-Power, High-Performance Microcontrollers with nanoWatt XLP Technology

Microchip Technology 

PIC16(L)F1824/1828

7.11 Power Control (PCON) Register

The Power Control (PCON) register contains flag bits

to differentiate between a:

• Power-on Reset (POR)

• Brown-out Reset (BOR)

• Reset Instruction Reset (RI)

• Stack Overflow Reset (STKOVF)

• Stack Underflow Reset (STKUNF)

• MCLR Reset (RMCLR)

The PCON register bits are shown in Register 7-2.

REGISTER 7-2: PCON: POWER CONTROL REGISTER

R/W/HS-0/q R/W/HS-0/q

U-0

STKOVF

STKUNF

—

bit 7

U-0

R/W/HC-1/q R/W/HC-1/q R/W/HC-q/u R/W/HC-q/u

—

RMCLR

RI

POR

BOR

bit 0

Legend:

HC = Bit is cleared by hardware

R = Readable bit

W = Writable bit

u = Bit is unchanged

x = Bit is unknown

‘1’ = Bit is set

‘0’ = Bit is cleared

HS = Bit is set by hardware

U = Unimplemented bit, read as ‘0’

-m/n = Value at POR and BOR/Value at all other Resets

q = Value depends on condition

bit 7

bit 6

bit 5-4

bit 3

bit 2

bit 1

bit 0

STKOVF: Stack Overflow Flag bit

1 = A Stack Overflow occurred

0 = A Stack Overflow has not occurred or set to ‘0’ by firmware

STKUNF: Stack Underflow Flag bit

1 = A Stack Underflow occurred

0 = A Stack Underflow has not occurred or set to ‘0’ by firmware

Unimplemented: Read as ‘0’

RMCLR: MCLR Reset Flag bit

1 = A MCLR Reset has not occurred or set to ‘1’ by firmware

0 = A MCLR Reset has occurred (set to ‘0’ in hardware when a MCLR Reset occurs)

RI: RESET Instruction Flag bit

1 = A RESET instruction has not been executed or set to ‘1’ by firmware

0 = A RESET instruction has been executed (set to ‘0’ in hardware upon executing a RESET instruction)

POR: Power-on Reset Status bit

1 = No Power-on Reset occurred

0 = A Power-on Reset occurred (must be set in software after a Power-on Reset occurs)

BOR: Brown-out Reset Status bit

1 = No Brown-out Reset occurred

0 = A Brown-out Reset occurred (must be set in software after a Power-on Reset or Brown-out Reset

occurs)

 2010 Microchip Technology Inc.

Preliminary

DS41419B-page 85

Share Link: