PIC16F616T-E/SL View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16F616T-E/SL

14-Pin, Flash-Based 8-Bit CMOS Microcontrollers

Microchip Technology 

PIC16F610/616/16HV610/616

15.6 DC Characteristics: PIC16HV610/616- I (Industrial)

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for industrial

Param

No.

Device Characteristics

Min

Typ†

Max Units

VDD

Conditions

Note

D020 Power-down Base

Current(IPD)(2,3)

PIC16HV610/616

D021

— 135 200 μA

— 210 280 μA

— 260 350 μA

— 135 200 μA

2.0 WDT, BOR, Comparators, VREF and

T1OSC disabled

3.0

4.5

2.0 WDT Current(1)

D022

D023

D024

— 210 285 μA

— 265 360 μA

— 215 285 μA

— 265 360 μA

— 240 340 μA

— 320 420 μA

— 370 500 μA

— 185 270 μA

— 265 350 μA

3.0

4.5

3.0 BOR Current(1)

4.5

2.0 Comparator Current(1), both

3.0 comparators enabled

4.5

2.0 Comparator Current(1), single

3.0 comparator enabled

D025

D026*

D027

— 320 430 μA

— 165 235 μA

— 255 330 μA

— 330 430 μA

— 175 245 μA

— 275 350 μA

— 355 450 μA

— 140 205 μA

4.5

2.0 CVREF Current(1) (high range)

3.0

4.5

2.0 CVREF Current(1) (low range)

3.0

4.5

2.0 T1OSC Current(1), 32.768 kHz

— 220 290 μA

3.0

D028

— 270 360 μA

— 210 280 μA

— 260 350 μA

4.5

3.0 A/D Current(1), no conversion in

4.5 progress

*

†

Note 1:

2:

3:

These parameters are characterized but not tested.

Data in “Typ” column is at 4.5V, 25°C unless otherwise stated. These parameters are for design guidance

only and are not tested.

The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this

peripheral is enabled. The peripheral Δ current can be determined by subtracting the base IDD or IPD

current from this limit. Max values should be used when calculating total current consumption.

The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is

measured with the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD.

Shunt regulator is always enabled and always draws operating current.

© 2009 Microchip Technology Inc.

DS41288F-page 151

Share Link: