PIC16LF723A-I/ML View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16LF723A-I/ML

28-Pin Flash Microcontrollers with nanoWatt XLP Technology

Microchip Technology 

PIC16F/LF722A/723A

20.0 IN-CIRCUIT SERIAL

PROGRAMMING™ (ICSP™)

ICSP™ programming allows customers to manufacture

circuit boards with unprogrammed devices. Programming

can be done after the assembly process allowing the

device to be programmed with the most recent firmware

or a custom firmware. Five pins are needed for ICSP™

programming:

• ICSPCLK

• ICSPDAT

• MCLR/VPP

• VDD

• VSS

The device is placed into Program/Verify mode by

holding the ICSPCLK and ICSPDAT pins low then

raising the voltage on MCLR/VPP from 0v to VPP. In

Program/Verify mode the Program Memory, User IDs

and the Configuration Words are programmed through

serial communications. The ICSPDAT pin is a

bidirectional I/O used for transferring the serial data and

the ISCPCLK pin is the clock input. For more information

on ICSP™ refer to the “PIC16F72X/PIC16LF72X

Programming Specification” (DS41332).

Note:

The ICD 2 produces a VPP voltage greater

than the maximum VPP specification of the

PIC16F/LF722A/723A. When using this

programmer, an external circuit, such as

the AC164112 MPLAB ICD 2 VPP voltage

limiter, is required to keep the VPP voltage

within the device specifications.

FIGURE 20-1:

TYPICAL CONNECTION FOR ICSP™ PROGRAMMING

External

Programming

Signals

VDD

VPP

GND

Data

Clock

VDD

10k

Device to be

Programmed

VDD

MCLR/VPP

VSS

ICSPDAT

ICSPCLK

*

*

*

To Normal Connections

* Isolation devices (as required).

 2010 Microchip Technology Inc.

DS41417A-page 183

Share Link: